Disorders bench
Disorders bench
Thought I'd show what I'm up to in my little corner of the loft
First on the list is this:
By no means a state of the art kit, but nicely detailed and a pretty decent fit. Anyway it only cost about £14.
This is how far I've gotten:
One thing I don't like about it is the two piece AIM-120 missiles. I thought about buying aftermarkets, but they'd be dearer than the kit!!!
First on the list is this:
By no means a state of the art kit, but nicely detailed and a pretty decent fit. Anyway it only cost about £14.
This is how far I've gotten:
One thing I don't like about it is the two piece AIM-120 missiles. I thought about buying aftermarkets, but they'd be dearer than the kit!!!
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
Re: Disorders bench
How’s the overall fit?
Besting 60 years of mediocre building of average kits in the stand off scale
Re: Disorders bench
It's quite good overall. A little filler and some sanding, but nothing major.jssel wrote:How’s the overall fit?
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
Re: Disorders bench
Well, after saying the fit was good, it was time to add the intake to the underside. This was going to take a bit of work:
To reduce the gap I sanded the top side of the intake to get it to sit lower:
This still left a gap. So I inserted some thin plasticard and glued it into place:
When it was dry, I trimmed it with a scalpel and sanded it flush:
I also spent the evening sanding seams on the missiles and drop tanks.
Moving slowly but surely and really enjoying the build.
To reduce the gap I sanded the top side of the intake to get it to sit lower:
This still left a gap. So I inserted some thin plasticard and glued it into place:
When it was dry, I trimmed it with a scalpel and sanded it flush:
I also spent the evening sanding seams on the missiles and drop tanks.
Moving slowly but surely and really enjoying the build.
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
Re: Disorders bench
Well it's starting to look kinda F-16ish:
The canopy is just set in place. I tinted it with Tamiya X-19 Smoke. It went a bit hazy, but when it dried I gave it another coat of Klear, which seemed to help.
After making a set of AIM-120s by joining the two halves and adding the fins, I realised the kit supplies a second set of 120s that are moulded in one piece
When I get the canopy masked and fixed in place, it's on with the primer.
Up next is this:
The canopy is just set in place. I tinted it with Tamiya X-19 Smoke. It went a bit hazy, but when it dried I gave it another coat of Klear, which seemed to help.
After making a set of AIM-120s by joining the two halves and adding the fins, I realised the kit supplies a second set of 120s that are moulded in one piece
When I get the canopy masked and fixed in place, it's on with the primer.
Up next is this:
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10806
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Disorders bench
F-16 is coming along nicely. It's a good looking aircraft. The Greyhound should be a good one to build also. I don't think Tamiya produce any bad models
Nigel
Nigel
- iggie
- Modelling Gent and Scholar
- Posts: 23424
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Disorders bench
Nice work on the F16, that looks to be coming n together really nicely...... and after all who doesn't like an F16?
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Re: Disorders bench
Thanks guys. I agree about F-16s - Lovely aircraft. And Nigel, You're right about Tamiya kits, I love building them.
I made a start on the M8 today. Thankfully the driveshaft came as a single piece with just a few bits to add. I dreaded trying to get everything aligned.
After about 45 mins I had the lower hull finished:
The F-16 still needed a few more slivers of filler after I added the tail and nose cone, so I never got the primer done.
Hopefully tomorrow
I made a start on the M8 today. Thankfully the driveshaft came as a single piece with just a few bits to add. I dreaded trying to get everything aligned.
After about 45 mins I had the lower hull finished:
The F-16 still needed a few more slivers of filler after I added the tail and nose cone, so I never got the primer done.
Hopefully tomorrow
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
- Softscience
- Staring out the window
- Posts: 7458
- Joined: April 5th, 2011, 4:34 pm
- Location: Maryland, near Washington DC
Re: Disorders bench
The Tamiya M8 is a great little kit.
- skypirate
- Modelling Gent and Scholar
- Posts: 7295
- Joined: May 1st, 2011, 6:13 am
- Location: Port Macquarie, Australia
Re: Disorders bench
A pair of good-looking projects!
Nice work,
David
Nice work,
David
Re: Disorders bench
Good going on the F16. I will file that info away for future. M8 looks very good.
Besting 60 years of mediocre building of average kits in the stand off scale
Re: Disorders bench
Thanks for looking in guys.
I've got all the main colours on the F-16:
The modulation is a little heavy, so I'll tone it down tomorrow. I've still the armaments to paint as well as the detail painting on the aircraft itself.
I've got all the main colours on the F-16:
The modulation is a little heavy, so I'll tone it down tomorrow. I've still the armaments to paint as well as the detail painting on the aircraft itself.
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
Re: Disorders bench
I toned down the modulation and added a few coats of Klear:
The other bits and bobs with a few coats of Klear as well:
I sprayed the yellow and brown ordnance markings on the missiles and bombs. I'll mask them before spraying the base colours.
What I don't like about the Italeri ordnance are the markings are engraved on.
The other bits and bobs with a few coats of Klear as well:
I sprayed the yellow and brown ordnance markings on the missiles and bombs. I'll mask them before spraying the base colours.
What I don't like about the Italeri ordnance are the markings are engraved on.
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II
Re: Disorders bench
Quite nice.
Besting 60 years of mediocre building of average kits in the stand off scale
Re: Disorders bench
Thanks Jeff.
Back with the Greyhound today.
As it has an open turret and I'm leaving the forward hatches open, I added a little detail inside. I used plastic strip and rod to make the comms boxes and used copper wire to simulate the wiring. I also added a few canteens which were found mounted inside AFVs.
Base colour added:
After weathering:
I drilled out the barrel of the 30 cal for the turret:
As it stands this evening:
Back with the Greyhound today.
As it has an open turret and I'm leaving the forward hatches open, I added a little detail inside. I used plastic strip and rod to make the comms boxes and used copper wire to simulate the wiring. I also added a few canteens which were found mounted inside AFVs.
Base colour added:
After weathering:
I drilled out the barrel of the 30 cal for the turret:
As it stands this evening:
Regards, Paddy.
On The Bench
Fujimi 1/72 A-7E Corsair II
On The Bench
Fujimi 1/72 A-7E Corsair II