Random Vandalism
-
- NOT the sheep
- Posts: 26180
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Random Vandalism
The Airfix 504 is quite a reasonable kit for its age. Great work on the interiors, there isn't a great deal that can be seen but what you have so far will make the cockpits look so much better than OOB.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Thanks Iggie, Shaun. I don't want to go crazy on it, but I want it to look at least somewhat like a real cockpit when you look in.
Also on the bench (such as a "bench" even exists for me) is a 1/24 TE27 Corolla:
Also on the bench (such as a "bench" even exists for me) is a 1/24 TE27 Corolla:
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10806
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Random Vandalism
Nice work going on here. The Corolla is looking very '70s in that orange, and you're using my spray paint of choice, picked up 4 cans for $10 last time
Nigel
Nigel
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Yeah, that Supercheap sale before Christmas. I picked up 8 cans. Stoked!
That one is actually the flat white. The orange was a different brand. Went on very nicely.
I grabbed a can of buff/tan today for WW1 linen and undercoating for yellows.
That one is actually the flat white. The orange was a different brand. Went on very nicely.
I grabbed a can of buff/tan today for WW1 linen and undercoating for yellows.
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
-
- NOT the sheep
- Posts: 26180
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Random Vandalism
Oh wow, a classic Corolla and in orange. Totally 70's and very cool, man
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Thanks. It could only be orangeShaunW wrote:Oh wow, a classic Corolla and in orange. Totally 70's and very cool, man
My wing jig turned up yesterday from Unique Master Models USA. Beautifully made thing. Took some doing to assemble it all. Should hopefully pick up the pace on the backlog of biplanes now.
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
- Dazzled
- Modelling Gent and Scholar
- Posts: 9592
- Joined: October 1st, 2011, 11:08 pm
- Location: Mid Glamorgan, South Wales
- Contact:
Re: Random Vandalism
Great job on the 1970s Toyota VV
What are you going to use for the rust?
What are you going to use for the rust?
COLD WAR S.I.G. LEADER
Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Heh
That's why I haven't owned a 1970s car for the last few years - I got tired of rust problems at annual registration time.
I did consider doing some weathering on it to make it look like one of my old thrashbarges with rust bubbling through, but opted for a less fussy build instead to have something looking more like this:
http://jdmchicago.com/wp/2012/06/patric ... olla-te27/;
That's why I haven't owned a 1970s car for the last few years - I got tired of rust problems at annual registration time.
I did consider doing some weathering on it to make it look like one of my old thrashbarges with rust bubbling through, but opted for a less fussy build instead to have something looking more like this:
http://jdmchicago.com/wp/2012/06/patric ... olla-te27/;
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Got a pair of Avro 504s on the go. One Airfix, one Amodel. Both are pretty low quality. The Amodel has clearly "borrowed" a lot from the Airfix in the kit design....
Neither had much cockpit to speak of so a bit of scratchbuilding has gone on.
Lots of ejector pin marks to fill and ribs to sand down. The struts on both have that crosspiece that old Airfix kits used, which recesses into the wing (but never well). I've filled those grooves too.
Currently at this point
Neither had much cockpit to speak of so a bit of scratchbuilding has gone on.
Lots of ejector pin marks to fill and ribs to sand down. The struts on both have that crosspiece that old Airfix kits used, which recesses into the wing (but never well). I've filled those grooves too.
Currently at this point
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Double rigging lines with elastic EZ line is doing my head in!
I'm trying a new approach now by pre-gluing lengths of line to a fine piece of wire at each end to the right spacing. The small stub of wire will then be glued to the rigging mount points. We'll see if it works...
I'm trying a new approach now by pre-gluing lengths of line to a fine piece of wire at each end to the right spacing. The small stub of wire will then be glued to the rigging mount points. We'll see if it works...
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19417
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Random Vandalism
They're coming along nicely - that cockpit looks great.
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Thanks, Sir T. They haven't progressed much further apart from some filling, sanding, priming, more filling, more sanding, more priming...
The Strutters have had more attention. One of the outboard struts went missing from one, so I needed to make a replacement. I want to get the top wing mounted so I can adjust the jig for the Avros.
My back and neck have been a mess lately, due in part to bending over models while rigging or aligning them. I got sick of this so I cut my workmat and mounted it on the top of my paint/tool drawers so now it sits closer to face height. I then have a small space on the table if I need it for cutting or other activities. Huge improvement! Back and neck pain has reduced greatly.
The Strutters have had more attention. One of the outboard struts went missing from one, so I needed to make a replacement. I want to get the top wing mounted so I can adjust the jig for the Avros.
My back and neck have been a mess lately, due in part to bending over models while rigging or aligning them. I got sick of this so I cut my workmat and mounted it on the top of my paint/tool drawers so now it sits closer to face height. I then have a small space on the table if I need it for cutting or other activities. Huge improvement! Back and neck pain has reduced greatly.
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
- Arcwelder
- Modelling Gent and Scholar
- Posts: 1228
- Joined: July 17th, 2015, 1:56 am
- Location: Cork City, Ireland
Re: Random Vandalism
I'm just going to let you carry on with those Strutters and 504ks... and learn from your pain suffering total breakdown ah.. "Experience".. yes, that'll do it..
Is this your sanderling?.
2016: A:40 B:12
2016: A:40 B:12
- VickersVandal
- Modelling Gent and Scholar
- Posts: 5034
- Joined: October 4th, 2012, 3:37 am
- Location: Sydney, Australia
Re: Random Vandalism
Ha!
In this case things are actually going well. Must be because I'm not rushing it for once. Also, the benefits of the elevated workspace cannot be over-stated!
The strutters are both winged and rigged so now the jig can be given over to Avro duties.
http://www.bigglesforum.net/forum/galle ... ge_id=1803;
By the way, not sure if you're rigging your Strutter with elastic thread but if so, I can strongly recommend the method I've been using for the double rigging. It has worked as well as I had hoped, if not better
In this case things are actually going well. Must be because I'm not rushing it for once. Also, the benefits of the elevated workspace cannot be over-stated!
The strutters are both winged and rigged so now the jig can be given over to Avro duties.
http://www.bigglesforum.net/forum/galle ... ge_id=1803;
By the way, not sure if you're rigging your Strutter with elastic thread but if so, I can strongly recommend the method I've been using for the double rigging. It has worked as well as I had hoped, if not better
Must.....build....ALL the Sopwith Camels!...
My Biggles Model display website: https://tinyurl.com/y74ydzae
My Biggles Model display website: https://tinyurl.com/y74ydzae
-
- NOT the sheep
- Posts: 26180
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Random Vandalism
Nice one VV, that jig is certainly a handy looking tool and that is an excellent tip for double wires in what I presume is 1/72nd scale.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300