The Unofficial Airfix Modellers' Forum
http://uamf.org.uk/

Toby's table top turmoil
http://uamf.org.uk/viewtopic.php?f=14&t=8043
Page 99 of 100

Author:  TobyC [ January 3rd, 2018, 2:43 pm ]
Post subject:  Re: Toby's table top turmoil

iggie wrote:
Ratch wrote:
Aren't you only allowed one weekend to build it :ha:


I thought you can only work on them on weekends..... but take as many weekends as you like :-D

Stupid boys :mrgreen:
Made a start with the engine using Vallejo MA Aluminium, Brass, umber wash and Mr Hobby burnt iron


Image

Image

Author:  ShaunW [ January 3rd, 2018, 5:33 pm ]
Post subject:  Re: Toby's table top turmoil

Good start and this looks to be a very nice kit of the aircraft. I'm pretty sure that Eduard's offering would be my first port of call for a Dr.1 - 1/48th is my preferred scale for these WW I single-seat fighters as I find them to be just too small and fiddly in 1/72nd.

I thought it was common knowledge that a weekend in Eduardland has a duration of about 6 weeks :mrgreen:

Author:  iggie [ January 3rd, 2018, 5:37 pm ]
Post subject:  Re: Toby's table top turmoil

ShaunW wrote:
Good start and this looks to be a very nice kit of the aircraft. I'm pretty sure that Eduard's offering would be my first port of call for a Dr.1 - 1/48th is my preferred scale for these WW I single-seat fighters as I find them to be just too small and fiddly in 1/72nd.

I thought it was common knowledge that a weekend in Eduardland has a duration of about 6 weeks :mrgreen:


Do you think they have pubs in Eduardland? :roll: That 6 weeks could be ambitious if so.....Image

Nice start on T'engine Toby; very convincing

Author:  Ratch [ January 3rd, 2018, 8:41 pm ]
Post subject:  Re: Toby's table top turmoil

TobyC wrote:
Stupid boys :mrgreen:

:lol:

Author:  Lone Modeller [ January 6th, 2018, 1:21 pm ]
Post subject:  Re: Toby's table top turmoil

Nice to see another WW1 type Toby. I do not like the look of those streak transfers....somehow using large transfer sheet lost its appeal when I tried some Roden lozenge some years ago....it would have been easier to hand paint it! I am sure that you will manage these well though. A very fine start on the engine.

Author:  TobyC [ January 7th, 2018, 10:13 pm ]
Post subject:  Re: Toby's table top turmoil

Started on the interior. It's so nice to have a kit where all the parts fit where they're supposed to.
If anyone wants to get into WW1 stuff then I can recommend this particular model by Eduard. Very little rigging and so far a joy to build.
I have another 4 in the stash. I may spend the rest of my life making little Fokkers. :mrgreen:

Image

Author:  TobyC [ January 7th, 2018, 10:14 pm ]
Post subject:  Re: Toby's table top turmoil

Started on the interior. It's so nice to have a kit where all the parts fit where they're supposed to.
If anyone wants to get into WW1 stuff then I can recommend this particular model by Eduard. Very little rigging and so far a joy to build.
I have another 4 in the stash. I may spend the rest of my life making little Fokkers. :mrgreen:

Image

Author:  iggie [ January 7th, 2018, 11:15 pm ]
Post subject:  Re: Toby's table top turmoil

I'm sure Stan Boardman would have a few choice comments to add to this thread...... :-D :-D

Author:  TobyC [ January 8th, 2018, 2:50 pm ]
Post subject:  Re: Toby's table top turmoil

Now for the joining of two halves

Image

Image

Image

Author:  ShaunW [ January 8th, 2018, 5:32 pm ]
Post subject:  Re: Toby's table top turmoil

Nicely done, Toby. Eduard really are producing some excellent kits.

Author:  skypirate [ January 10th, 2018, 10:48 pm ]
Post subject:  Re: Toby's table top turmoil

Another biplane masterclass in progress!
Looking grand!

David

Author:  Stuart [ January 11th, 2018, 7:36 am ]
Post subject:  Re: Toby's table top turmoil

Lovely progress on that kit Toby.

Author:  TobyC [ January 11th, 2018, 10:54 am ]
Post subject:  Re: Toby's table top turmoil

skypirate wrote:
Another biplane masterclass in progress!
Looking grand!

David

Triplane this time ;-)
Thanks all for the generous comments

Author:  TobyC [ January 15th, 2018, 11:21 am ]
Post subject:  Re: Toby's table top turmoil

I've decided to use Aviattics bespoke decals rather than make my own from their streaked camouflage decal sheet.

Image[/url

[url=https://postimages.org/]Image


I tried applying the starboard decal without removing the forward outlet with dire results. "Repairs" effected but a mistake I won't make again

Image

So I cut the port one off, applied the decal and then reattached the outlet

Image

Image

I did attach the top decal but my initial fitting of the side decals left a gap so I've had to make up a new one from the streaked camouflage set I already had from Aviattic. Still not correct but most will be hidden by the triangle decals

Image

Author:  skypirate [ January 22nd, 2018, 7:14 am ]
Post subject:  Re: Toby's table top turmoil

That streaked camo is masterfully done!

Cheers,

David

Page 99 of 100 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/