CBK at SMW 2012: Location and Setup
Posted: October 21st, 2012, 2:42 pm
As you may know due to recent extensions to the Exhibition Centre the show layout has changed this year. All three halls are now being used for trader, clubs and SIGs. The competition is now in a separate area that I believe has natural daylight. The Kit Swap has also been moved to a room of it's own adjoining Hall 3.
The CBK SIG is in Hall 3 roughly were the competition tables used to be. Section 3E table 3320/3321, (CC SIG are next door 3222/3323). We are on one the main thoroughfares into Hall 2 and over look the Overseas clubs area. Behind us are a Valentine tank and Dingo scout car. So I believe we are in a good spot.
Overview: http://www.smwshow.com/showguide.php;
Hall 3: http://www.smwshow.com/downloads/show-g ... CJAV4G.pdf;
**Important information for set up on Friday**
If you are planning to help with set up on Friday please PM and I will send you a copy of the full details. Below is brief summary.
1. Club & SIG set up starts at 2pm. From experience Matt and I get there ~3pm.
2. Only IPMS members can gain access to the building on Friday. If you were planning to drop you model off on the Friday and are not an IPMS member PM me and I will supply you with mobile numbers so that we can come out and meet you.
3. IPMS members *MUST* register with the IPMS desk in Hall 1 to get a wrist band that will give you entry for the entire weekend. **DO NOT FORGET YOUR IPMS CARD**
4. I don't have any spare car permits for Friday, these are needed for Matt and Beany
The CBK SIG is in Hall 3 roughly were the competition tables used to be. Section 3E table 3320/3321, (CC SIG are next door 3222/3323). We are on one the main thoroughfares into Hall 2 and over look the Overseas clubs area. Behind us are a Valentine tank and Dingo scout car. So I believe we are in a good spot.
Overview: http://www.smwshow.com/showguide.php;
Hall 3: http://www.smwshow.com/downloads/show-g ... CJAV4G.pdf;
**Important information for set up on Friday**
If you are planning to help with set up on Friday please PM and I will send you a copy of the full details. Below is brief summary.
1. Club & SIG set up starts at 2pm. From experience Matt and I get there ~3pm.
2. Only IPMS members can gain access to the building on Friday. If you were planning to drop you model off on the Friday and are not an IPMS member PM me and I will supply you with mobile numbers so that we can come out and meet you.
3. IPMS members *MUST* register with the IPMS desk in Hall 1 to get a wrist band that will give you entry for the entire weekend. **DO NOT FORGET YOUR IPMS CARD**
4. I don't have any spare car permits for Friday, these are needed for Matt and Beany