Airfix 1/144 BAC 1-11 **FINISHED**
Moderator: JamesPerrin
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Airfix 1/144 BAC 1-11 **FINISHED**
This one I remember from being around aged 10 and lived in my sock draw for a while. The instructions have you paint the fuselage halves white first and then apply the cheat lines over the windows. A little punch tool removes the decal film from the windows. Whence the strips of window glazing can be inserted and the fuselage closed up. The say the least I will not be following this process and will glaze the windows with PVA once the decals have been applied over a complete and painted model.
I was missing one of the cargo doors and had to replace with card. Most of what has gone on so far is fettling and filling. There is nothing inside bar a bulkhead behind the cockpit area. This was painted black, I didn't bother doing anything to the cabin as I determined even paint wouldn't been seen.
Fettling the fuselage slots for the engines make them line up with the stubs much better.
Yes the rear stairs does work!
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- TomW
- Modelling Gent and Scholar
- Posts: 2279
- Joined: May 1st, 2011, 8:09 am
- Location: Devizes, Wiltshire
Re: Airfix 1/144 BAC 1-11
Nice start James, I've often been tempted by airliner models but have never gotten round to building one.
Regards
Tom
Regards
Tom
Veni, Venari, Vamoosi
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
This was my first airliner and is also my second ever airliner model!
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
BTW I could have glued the tailplane on but this would have restricted access to the engine stubs which do need a fill and sand.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- Dirkpitt289
- NUMA's Auto Mechanic
- Posts: 8724
- Joined: May 2nd, 2011, 1:55 am
- Location: New jersey USA
- Contact:
Re: Airfix 1/144 BAC 1-11
Very cool I like it. Looks like the decals are a bit beat
.... Dirk
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
-
- Modelling Gent and Scholar
- Posts: 4421
- Joined: May 1st, 2011, 11:14 am
- Location: Doncaster, Socialist Republic of South Yorkshire.
Re: Airfix 1/144 BAC 1-11
Nice James, I have "Big Orange" underway, just waiting for the sun to bleach the decals.
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: Airfix 1/144 BAC 1-11
Very nice progress there James, it was also the first jet airliner I ever flew on, and the same airline.JamesPerrin wrote:This was my first airliner and is also my second ever airliner model!
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
That demands some progress pics Shane!shangos70 wrote:Nice James, I have "Big Orange" underway, just waiting for the sun to bleach the decals.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
They look OK, what you see is the protective waxed paper.Dirkpitt289 wrote:Very cool I like it. Looks like the decals are a bit beat
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
Sometimes no matter how much you convince yourself you've got some modification correct as soon as you do it you realise you've made a booboo!
The wing fences on the Airfix kit are in the wrong position for production aircraft. Looking at photos which were all in profile more or less I convinced myself that the correct position was aligned with inner flap actuators. Wrong, as soon as I did it I had a bad feeling and looked again and then realised I had some plans in the Aeroplane Database article on the 1-11. For the record they should be halfway between the two inner most actuators.
Filled my shame with shims of card including the leading edge lights which are another hangover from the prototype origins of the kit. Rough shapes were cut for the actual wing fences and I'll sand them to shape in situ.
The wing fences on the Airfix kit are in the wrong position for production aircraft. Looking at photos which were all in profile more or less I convinced myself that the correct position was aligned with inner flap actuators. Wrong, as soon as I did it I had a bad feeling and looked again and then realised I had some plans in the Aeroplane Database article on the 1-11. For the record they should be halfway between the two inner most actuators.
Filled my shame with shims of card including the leading edge lights which are another hangover from the prototype origins of the kit. Rough shapes were cut for the actual wing fences and I'll sand them to shape in situ.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
After more sanding and filling it was a relief to find the cockpit window was a good snug fit after squaring up the opening. A few weeks later I was able masking it and get it primered. First grey to cover up the filler, trying to do this with white primer is a thankless task. Then the white primer and finally a couple or three coats of appliance white.
Now just got to work out how to mask it up so that it matches decal cheat line!
Now just got to work out how to mask it up so that it matches decal cheat line!
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10798
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Airfix 1/144 BAC 1-11
That's looking good.
Nigel
Nigel
- JamesPerrin
- Looks like his avatar
- Posts: 13669
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/144 BAC 1-11
This model required a lot of masking and much of it quite tricky. The grey underside need to follow the cheat lines down the side of the fuselage and under the nose. For this I traced a paper template from the decals and reduced the bottom edge by 2mm. I then tape this to the model and marked the edge and masked the white upper to this line. I use Light Aircraft Grey as it looked the closest match in my selection of paints.
This was then followed by a lot more masking for the NMF leading edges and engines. I used Alcad Al and then over sprayed some dull Al on the engines after masking off a few panels. Not technically accurate but added some interest.
I lightening some dark blue with grey (in fact used black and white paint) to try and match the decals but didn't go far enough, however it does seem closer to the Caladonian colours than the pale decals.
I could then finally pull off all the masking. At this stage the model didn't look great, the surface finish is far from my best and the would have benefited from rubbing the primer layers done, if I had the time.
Late one night I decide to go for it and get the decals on. Though thick they were easy to handle and went down well using Micro Sol&Set. The cheat lines come in two parts, the rear is slightly wider than the front part annoyingly and didn't fit correctly round the nacelle mounts which require a little snip. A couple of judicious slices in the decal helps it conform to the nose as well - it did show that my paper mask worked everywhere apart from under the nose where the grey has left a significant gap to the decal and will need touching up. The model however is transformed by the decals and despite it short comings does look pretty good now.
This was then followed by a lot more masking for the NMF leading edges and engines. I used Alcad Al and then over sprayed some dull Al on the engines after masking off a few panels. Not technically accurate but added some interest.
I lightening some dark blue with grey (in fact used black and white paint) to try and match the decals but didn't go far enough, however it does seem closer to the Caladonian colours than the pale decals.
I could then finally pull off all the masking. At this stage the model didn't look great, the surface finish is far from my best and the would have benefited from rubbing the primer layers done, if I had the time.
Late one night I decide to go for it and get the decals on. Though thick they were easy to handle and went down well using Micro Sol&Set. The cheat lines come in two parts, the rear is slightly wider than the front part annoyingly and didn't fit correctly round the nacelle mounts which require a little snip. A couple of judicious slices in the decal helps it conform to the nose as well - it did show that my paper mask worked everywhere apart from under the nose where the grey has left a significant gap to the decal and will need touching up. The model however is transformed by the decals and despite it short comings does look pretty good now.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10798
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Airfix 1/144 BAC 1-11
Yes it does. Nice work.JamesPerrin wrote:The model however is transformed by the decals and despite it short comings does look pretty good now.
Nigel
- PaulBradley
- Staring out the window
- Posts: 21201
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Airfix 1/144 BAC 1-11
Very smart, James.
A BCal 1-11 was the first airliner in which I rode, from Glasgow to Southampton back in the very early '70's....one day, I'll build a model of it.
A BCal 1-11 was the first airliner in which I rode, from Glasgow to Southampton back in the very early '70's....one day, I'll build a model of it.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"