The Unofficial Airfix Modellers' Forum
http://uamf.org.uk/

Pocher 1/4 ducati panigale
http://uamf.org.uk/viewtopic.php?f=24&t=16087
Page 1 of 7

Author:  kpnuts [ September 19th, 2017, 8:14 pm ]
Post subject:  Pocher 1/4 ducati panigale

Hi all well it's arrived man it's huge here is a pic of the box
Image
And just for size comparison here it is along side a calor gas fire
Image
Image
Image
The instruction manual
Image
It's really well packaged
Image
Image
Image
And here is the Paul Koo upgrade kit
Image
Image
Image
Image
Image
I'm not allowed to start it till my birthday on the 26th of next month though (although I wasn't allowed to open it then);)

Author:  Clashcityrocker [ September 20th, 2017, 5:06 am ]
Post subject:  Re: Pocher 1/4 ducati panigale

Wow! Got any pets? You could maybe teach them to ride it :grin:

Nigel

Author:  kpnuts [ September 20th, 2017, 6:55 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Hi all well I've not actually started building it yet but I couldn't resist comparing it to the biggest scale I've built so far (1/6 bikes) these bikes are huge but putting the ducati crank case and gearbox along side it this is going to be enormous (baring in mind there are no cylinder heads or fuel intake on it) by the time I add those the engine will probably be twice this size.
I will probably being upsetting the purists among you as it won't be the box colours it will be a custom job.
Image
Image
Our daughter has a dachshund but it would be to big for him.

Author:  ShaunW [ September 21st, 2017, 5:17 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

That is a hell of a kit, KP and with the additional parts will surely build up into a first class model of this Ducati superbike. At 1/4 scale it will be pretty big - almost like a paddock bike!

The Mad Max alike Katana looks interesting.

Author:  syd-baines [ September 27th, 2017, 10:55 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

wow this is a big one looking forward to seeing you build this

Author:  kpnuts [ October 25th, 2017, 7:46 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Hi all well I won't be here on my birthday so I got permission to start it today.
I decided to start on the exhaust as it has been noted as the worst fitting part of the whole kit, this thing is huge the bit of the exhaust I've started is the length of a 1/24 car and that's basically just the down pipe. So here is the start of this massive kit, I must say I'm buzzing with excitement.
Image
I've plugged some of the screw holes
Image
Then decided to add the first missing detail, the welding seam on the curved outside and inside section of the exhaust (i will add the weld seam round the other side when its finally attached to the rest of it)
Image
Image
I've not glued the two sections together yet to make drilling of the holes for the oxygen sensors easier.
Image
Image
There's loads of detail you could add just to this part and I'm going to try and add it all, I did say TRY.

Author:  iggie [ October 25th, 2017, 8:34 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Nice start!

Author:  kpnuts [ October 30th, 2017, 10:31 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Hi all well after an update on my samsung tab s2 it has made it totally useless for posting on forums so I'm now stuck with this incredibly slow and clumsy laptop so here is the next installment. i was following silver911 build of this and decided to emulate his enhancement of the exhaust joins and copied his use of aluminium foil on them.
Image
also I've added the thickening where the oxygen sensors go
[img][IMG]http://i67.tinypic.com/301m1oi.jpg[/img]
(its made from the phillips screw covers from a bedroom unit)
made a start on the engine too. Added some weathering as well. Put a rule in the last pic to give an idea of the size of this beast.
Image
Image
Image
Image
Image
Image

Author:  ShaunW [ October 31st, 2017, 6:40 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

That engine is looking the business, KP. I'm a bit out of touch with modern bikes, is this Duke a big twin or a V4?

Author:  kpnuts [ October 31st, 2017, 9:28 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Made a start on the exhaust valve and made up the spring hangers soon be ready for priming.
Image
Image
Image
It's a twin mate.

Author:  syd-baines [ November 2nd, 2017, 4:24 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

making a good start lot of detail in that exhaust can`t wait for more

Author:  kpnuts [ November 2nd, 2017, 9:07 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Hi all I've started weathering the exhaust I'm using Uschi metal powders and a combination of copper and blue grey dry brushed on, still more to do but it looks promising
Image
Image
Image
Added some more engine details like the generator wires
Image
Image

Author:  kpnuts [ November 3rd, 2017, 9:16 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Hi all well here is the first disappointment with the upgrade kit he supplies the steel beads to make the banjo connectors for various connections but then tells you to use poacher 2 millimetre bolts for the head of the banjo connector (there are none supplied in the kit only cross head screws) I realise Paul has built loads of poacher kits, this is my first so I don't have any poacher 2 mill bolts, what I do have though is these.
Image
So onwards and upwards
Image
I've made the springs for the exhaust too.
Image
Image
Image

Author:  kpnuts [ November 4th, 2017, 7:31 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Hi all well (despite the gorgeous paint job on the kit parts) I've primed it ready for the new colour (I intend to leave this for at least a week to cure before adding the first coat of the two pack paint I have)
Image
Done some more to the engine
Image
Image
Image

Author:  ShaunW [ November 5th, 2017, 6:17 pm ]
Post subject:  Re: Pocher 1/4 ducati panigale

Excellent stuff, KP, this is really coming along very well indeed.

Page 1 of 7 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/