Paul's Canadian Horse **FINISHED**
-
- NOT the sheep
- Posts: 26188
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Paul's Canadian Horse
Looking great Paul - I've no objections at all to an extension, but then again I'm not a participant, so there's probably something in the rules about that
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- PaulBradley
- Staring out the window
- Posts: 21219
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Paul's Canadian Horse
Getting there...
Needs a dull coat and some exhaust staining - should be able to get that done this afternoon.
Needs a dull coat and some exhaust staining - should be able to get that done this afternoon.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: Paul's Canadian Horse
Paul,
Excellent build mate, that is a great looking Mustang mate, do like seeing them in cammo, wel done.
Excellent build mate, that is a great looking Mustang mate, do like seeing them in cammo, wel done.
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
- Sissel
- Modelling Lady and Scholar
- Posts: 4097
- Joined: October 31st, 2011, 12:39 pm
- Location: Island in Norway
Re: Paul's Canadian Horse
Stunning RAF'er!
Confused as always, and somewhere in hiding on the Scandinavian peninsula...
- PaulBradley
- Staring out the window
- Posts: 21219
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Paul's Canadian Horse
Cheers Mark and Sissel!
Calling this one done - there's a couple of minor touch-ups to do, but I wanted to get photos done tonight before the light went.
This is a Mustang III of 441 (Canadian) Squadron, Germany, summer 1945:
A mostly enjoyable build - its a nice kit - and I'm quite pleased with the outcome. I've built 5 or 6 of the Accurate Miniatures P-51 kits and I can recommend them if you can get a hold of them. Hopefully, Italeri will re-release some of them in the future, as they've done with a couple of other AM kits.
Calling this one done - there's a couple of minor touch-ups to do, but I wanted to get photos done tonight before the light went.
This is a Mustang III of 441 (Canadian) Squadron, Germany, summer 1945:
A mostly enjoyable build - its a nice kit - and I'm quite pleased with the outcome. I've built 5 or 6 of the Accurate Miniatures P-51 kits and I can recommend them if you can get a hold of them. Hopefully, Italeri will re-release some of them in the future, as they've done with a couple of other AM kits.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
- Sissel
- Modelling Lady and Scholar
- Posts: 4097
- Joined: October 31st, 2011, 12:39 pm
- Location: Island in Norway
Re: Paul's Canadian Horse
Great photos and a lovely build!
I've only built an Accurate Miniatures A-36 and really enjoyed that. Great kit.
I've only built an Accurate Miniatures A-36 and really enjoyed that. Great kit.
Confused as always, and somewhere in hiding on the Scandinavian peninsula...
- PaulBradley
- Staring out the window
- Posts: 21219
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Paul's Canadian Horse
Thanks, Sissel.
I added the exhaust staining after these photos were taken, and added some Solvaset to the serial decals to get rid of the silvering. So it was officially completed at about 8:30 last night...!
I added the exhaust staining after these photos were taken, and added some Solvaset to the serial decals to get rid of the silvering. So it was officially completed at about 8:30 last night...!
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
Re: Paul's Canadian Horse **FINISHED**
Paul,
A very nice rendition of the 'Stang!
regards,
Martin
A very nice rendition of the 'Stang!
regards,
Martin
- PaulBradley
- Staring out the window
- Posts: 21219
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Paul's Canadian Horse **FINISHED**
Thanks, Martin.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
- Old_Tonto
- Modelling Gent and Scholar
- Posts: 8063
- Joined: May 1st, 2011, 7:41 pm
- Location: Middlesbrough, Peoples Republic of Teesside.
Re: Paul's Canadian Horse **FINISHED**
Nicely done sir.
2023 - A:0 B:0 C:0
Current Projects:
East German Air Force (1956-90)
South African Air Force (1958-93)
Current Projects:
East German Air Force (1956-90)
South African Air Force (1958-93)
Re: Paul's Canadian Horse **FINISHED**
Bravo. Brings a tear to my eye.
Besting 60 years of mediocre building of average kits in the stand off scale
-
- NOT the sheep
- Posts: 26188
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Paul's Canadian Horse **FINISHED**
Great finish Paul, that looks excellent.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300