Murfv's FAA pirate * *DNF* *
- Murfv
- Onto the Clever Stuff, Now.
- Posts: 173
- Joined: May 1st, 2011, 12:13 pm
- Location: Carlow, Ireland
Murfv's FAA pirate * *DNF* *
I have retrieved this rather sorry looking Fujimi A-7E from my pile of unfulfilled potential, with the
plan of finishing it in the colours of 809 squadron, FAA.
The inspiration comes from profile on a 'what if' thread that I saw on another forum which featured
a Corsair II in Extra Dark Sea Gray/White scheme as used by the FAA on various types
(e.g. Sea Vixen & Phantom) in the 60's & 70's.
First off was to give the kit a good clean & sanding to remove some of the years of grime and less
than perfect layers of paint which had been applied.
An inventory of the parts showed that a number of the bits had gone astray over time(most of the U/C,
as well as one of the tailplanes) and as a result of this I made the decision to complete the Corsair in flight.
I have fitted the U/C doors and will be giving it a blast of halfords best get started.
I will be replacing the tail planes with ones from a scrapped Airfix A-7.
Thanks
plan of finishing it in the colours of 809 squadron, FAA.
The inspiration comes from profile on a 'what if' thread that I saw on another forum which featured
a Corsair II in Extra Dark Sea Gray/White scheme as used by the FAA on various types
(e.g. Sea Vixen & Phantom) in the 60's & 70's.
First off was to give the kit a good clean & sanding to remove some of the years of grime and less
than perfect layers of paint which had been applied.
An inventory of the parts showed that a number of the bits had gone astray over time(most of the U/C,
as well as one of the tailplanes) and as a result of this I made the decision to complete the Corsair in flight.
I have fitted the U/C doors and will be giving it a blast of halfords best get started.
I will be replacing the tail planes with ones from a scrapped Airfix A-7.
Thanks
Vincent
To much plastic, not enough time!
To much plastic, not enough time!
Re: Murfv's FAA pirate
I think EDSG over white will look a lot better on this that the USN light gull grey over white. And British roundels look great on anything!
I'm a mostly full-time modeller put a part-time poster....
- Narayan
- If anyone needs me, I'll be in my office
- Posts: 2602
- Joined: April 10th, 2011, 7:01 pm
- Location: The Middle of Nowhere in Ireland
Re: Murfv's FAA pirate
Great subject Vincent. Look forward to seeing how it turns out.
_________________
Narayan
He's experienced about as much pain and suffering as anyone I've encountered, give or take, and he still has Hell to look forward to.
A:B 2013 14:06 2012 20:05 2011 11:10 2010 44:12 2009 19:16 2008 16:03 Overall 207:57
_________________
Narayan
He's experienced about as much pain and suffering as anyone I've encountered, give or take, and he still has Hell to look forward to.
A:B 2013 14:06 2012 20:05 2011 11:10 2010 44:12 2009 19:16 2008 16:03 Overall 207:57
- AndrewR
- In the basement lab
- Posts: 24097
- Joined: April 5th, 2011, 4:13 pm
- Location: Ottawa, Ontario, The Great White North
- Contact:
Re: Murfv's FAA pirate
Great idea, and that FAA scheme is one of the best
Up in the Great White North
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19447
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Murfv's FAA pirate
FAA A-7 niccccccceeeeeeee! I love this idea and am looking forward to seeing what you do with it....
Actually, I have an A-7D and some spare Harrier GR.3 decals mmmmmmmm.....
Great work, I love the A-7
Regards
Stuart
Actually, I have an A-7D and some spare Harrier GR.3 decals mmmmmmmm.....
Great work, I love the A-7
Regards
Stuart
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- Murfv
- Onto the Clever Stuff, Now.
- Posts: 173
- Joined: May 1st, 2011, 12:13 pm
- Location: Carlow, Ireland
Re: Murfv's FAA pirate
Time for a little progress report, not a huge amount done over the last week due to an unexpected outbreak of
fine weather locally(clear sky's and temps in the low to mid 20's almost totally unheard off here at this
time of year) which distracted me from getting more done.
Anyway, after a good going over with the micro mesh, I gave the Corsair a blast of Halfords white primer(will do for
the underside colour too) to blend the bare plastic u/c doors in with the rest of the airframe.
A quick sanding overall to smooth out any imperfections in the white and then out with the masking tape.
With all necessary underside area's masked, out came the EDSG, I am using the Mr.Hobby acrylic for the first
time, mixed 1:1 with Mr.Color thinner, and found it to be straight forward to use and gave impressive results with fast
drying time and excellent coverage.
Next will be some detail painting, complete the cockpit with the pilot and give a couple coats of gloss to
get ready for decals.
Thanks for looking
fine weather locally(clear sky's and temps in the low to mid 20's almost totally unheard off here at this
time of year) which distracted me from getting more done.
Anyway, after a good going over with the micro mesh, I gave the Corsair a blast of Halfords white primer(will do for
the underside colour too) to blend the bare plastic u/c doors in with the rest of the airframe.
A quick sanding overall to smooth out any imperfections in the white and then out with the masking tape.
With all necessary underside area's masked, out came the EDSG, I am using the Mr.Hobby acrylic for the first
time, mixed 1:1 with Mr.Color thinner, and found it to be straight forward to use and gave impressive results with fast
drying time and excellent coverage.
Next will be some detail painting, complete the cockpit with the pilot and give a couple coats of gloss to
get ready for decals.
Thanks for looking
Vincent
To much plastic, not enough time!
To much plastic, not enough time!
- Zee28
- Modelling Gent and Scholar
- Posts: 2834
- Joined: March 8th, 2013, 10:21 pm
- Location: South London
Re: Murfv's FAA pirate
Looking very good so far Murfv, and you're giving Sir T ideas!
Zee
Zee
Re: Murfv's FAA pirate
Looking cool! It'll be really, really cool once the decals go on!
I'm a mostly full-time modeller put a part-time poster....
- Sissel
- Modelling Lady and Scholar
- Posts: 4097
- Joined: October 31st, 2011, 12:39 pm
- Location: Island in Norway
Re: Murfv's FAA pirate
That looks like a perfect paint job to me. Love the color!
Confused as always, and somewhere in hiding on the Scandinavian peninsula...
-
- Modelling Gent and Scholar
- Posts: 4422
- Joined: May 1st, 2011, 11:14 am
- Location: Doncaster, Socialist Republic of South Yorkshire.
Re: Murfv's FAA pirate
The paint looks very smooth, good stuff.
- Murfv
- Onto the Clever Stuff, Now.
- Posts: 173
- Joined: May 1st, 2011, 12:13 pm
- Location: Carlow, Ireland
Re: Murfv's FAA pirate * *DNF* *
Regret to report that I this one did get finished by the deadline
due to unplanned outbreak of domestic reality.
I did get the painting done but still have to make a start on the decals
once I have a couple of coats of Klear on.
Progress to date
I will be finishing this mission over the next few weeks and will post photos
of the completed a/c in the appropriate area.
Cheers
due to unplanned outbreak of domestic reality.
I did get the painting done but still have to make a start on the decals
once I have a couple of coats of Klear on.
Progress to date
I will be finishing this mission over the next few weeks and will post photos
of the completed a/c in the appropriate area.
Cheers
Vincent
To much plastic, not enough time!
To much plastic, not enough time!