Jeff's Texan with an accent.***Finished*****

A single-type GB for the famous North American T-6 Texan, SNJ, Harvard trainer in any guise, markings, or scale.
Runs 1-30 September and your GBLs are Gregers & Prisca.
User avatar
jssel
Still crazy after all these years
Posts: 11995
Joined: April 5th, 2011, 3:42 pm

Jeff's Texan with an accent.***Finished*****

Post by jssel »

OK so here we go.

I will be building the Monogram AT6 Texan circa 1979 in 1/48th scale.

Box Art:

Image

This kit has been re-popped several times and it is a good one. Raised detail but nicely done and overall fit pretty good. I have several of these which have provided parts for other projects but I still have a complete kit to build here.

Innards:

Image

Lots of parts with two very nice pilot and instructor figures included. Back in the good old days when Bill Koster worked for Monogram.

Instructions and decals:

Image

Decals for USAAF and US Navy aircraft which are quite good with a flat finish. Not sure if I will use them.

My thoughts are to do the Harvard that Robert Mitchum borrows in Reunion at Fairborough. DG/DE/Trainer Yellow.
Besting 60 years of mediocre building of average kits in the stand off scale
User avatar
giulio_gobbi
Modelling Gent and Scholar
Posts: 1971
Joined: May 4th, 2011, 8:37 pm
Location: Naples, Italy
Contact:

Re: Jeff's Texan with an accent.

Post by giulio_gobbi »

I've built this is 1980.....
It's a beautiful mold. :)
Sometimes the talent consists exactly in that: try five dozen times when others stop at three dozen...! (F.Labelle)
I think that modeling is a subtle mix of zen philosophy and absolute crazyness - but in my case I would not dare to specify the respective percentage of each......
User avatar
Old_Tonto
Modelling Gent and Scholar
Posts: 8061
Joined: May 1st, 2011, 7:41 pm
Location: Middlesbrough, Peoples Republic of Teesside.

Re: Jeff's Texan with an accent.

Post by Old_Tonto »

Nice to see a quarter scale entry in this GB.

What colour will it be?
2023 - A:0 B:0 C:0
Current Projects:
East German Air Force (1956-90)
South African Air Force (1958-93)
User avatar
Miss-Stang
Active Participant
Posts: 833
Joined: March 9th, 2013, 4:48 pm

Re: Jeff's Texan with an accent.

Post by Miss-Stang »

Looks like a nice kit, not sure about the chap on the sprue who appears to be dancing, is that the Lego jig I hear so much about?

I think it'll look great in 1/48th.
Regards,

Miss-Stang
User avatar
Sissel
Modelling Lady and Scholar
Posts: 4097
Joined: October 31st, 2011, 12:39 pm
Location: Island in Norway

Re: Jeff's Texan with an accent.

Post by Sissel »

Nice to see a 1/48 appearing.
I remember those old Monogram 1/48, have built some of them. Glad the decals are usable. I wasn't that lucky with my kits.

Robert Mitchum is a great actor, seen lots of his movies, but not this one.
Confused as always, and somewhere in hiding on the Scandinavian peninsula...
User avatar
jssel
Still crazy after all these years
Posts: 11995
Joined: April 5th, 2011, 3:42 pm

Re: Jeff's Texan with an accent.

Post by jssel »

Just seven parts make up the cockpit. A little creative painting and it really pops.

Image

Ah, the dancing figure. That one represents the flight instructor standing with one foot on the wing and the other on an entry step. He is telling the student, "Be careful you don't get yourself killed!"

Everything fits inside the fuselage halves and pictures of that are right around the corner.

The scheme I am choosing is AT6 HArvard G-AZSC when it was painted for the movie Reunion at Fairborough. It was flown near the end of the movie over Greenham Common and intercepted by the Hunter Memorial Flight. At that time it was painted DG/DE and Trainer yellow. I chose that scheme because of the many schemes worn by the Harvard, you do not see that one very often. I have the movie on VHS and will have to watch it again and take notes.
Besting 60 years of mediocre building of average kits in the stand off scale
User avatar
PaulBradley
Staring out the window
Posts: 21201
Joined: April 6th, 2011, 3:08 pm
Location: Flagstaff, AZ

Re: Jeff's Texan with an accent.

Post by PaulBradley »

I think, IIRC, that would be this one:

Image
Paul

За демократію і незалежний Україну

"For Democracy and a Free Ukraine"
User avatar
jssel
Still crazy after all these years
Posts: 11995
Joined: April 5th, 2011, 3:42 pm

Re: Jeff's Texan with an accent.

Post by jssel »

I am sure you are right Paul. Anyway, that's the scheme. There is a lot on the aircraft on the net. Apparently it suffered damage from a forced landing. Gary Numan was a reported owner.

Thanks Uncle Paul :ha:
Besting 60 years of mediocre building of average kits in the stand off scale
User avatar
PaulBradley
Staring out the window
Posts: 21201
Joined: April 6th, 2011, 3:08 pm
Location: Flagstaff, AZ

Re: Jeff's Texan with an accent.

Post by PaulBradley »

:ha:
Paul

За демократію і незалежний Україну

"For Democracy and a Free Ukraine"
User avatar
Sissel
Modelling Lady and Scholar
Posts: 4097
Joined: October 31st, 2011, 12:39 pm
Location: Island in Norway

Re: Jeff's Texan with an accent.

Post by Sissel »

Who should I start calling grandpa? :ha:
Confused as always, and somewhere in hiding on the Scandinavian peninsula...
User avatar
jssel
Still crazy after all these years
Posts: 11995
Joined: April 5th, 2011, 3:42 pm

Re: Jeff's Texan with an accent.

Post by jssel »

Never mind. But I have two grandkids , 5yrs and 9mos. Love em. Love em. Love em.
Besting 60 years of mediocre building of average kits in the stand off scale
User avatar
jssel
Still crazy after all these years
Posts: 11995
Joined: April 5th, 2011, 3:42 pm

Re: Jeff's Texan with an accent.

Post by jssel »

With this shot I am giving it a rest for this evening.

Image

Overall fit is good but using either nose piece (trainer or gun mount) there is a rather large step that needed attention. You can see effort in the picture. Only took a minimum amount of time to correct and the wing went on with no effort. I used strips of tape to maintain the dihedral while the glue set up.
Besting 60 years of mediocre building of average kits in the stand off scale
User avatar
PaulBradley
Staring out the window
Posts: 21201
Joined: April 6th, 2011, 3:08 pm
Location: Flagstaff, AZ

Re: Jeff's Texan with an accent.

Post by PaulBradley »

Quick start there, Jeff!
Paul

За демократію і незалежний Україну

"For Democracy and a Free Ukraine"
User avatar
Clashcityrocker
Modelling Gent and Scholar
Posts: 10806
Joined: May 1st, 2011, 12:31 am
Location: Adelaide. South Australia

Re: Jeff's Texan with an accent.

Post by Clashcityrocker »

Nice start. Looking good.

Nigel
User avatar
Stuart
Raider of the Lost Ark Royal
Posts: 19417
Joined: February 25th, 2013, 4:55 pm
Location: North Wales
Contact:

Re: Jeff's Texan with an accent.

Post by Stuart »

crumbs thats progress - looking good!
Stuart Templeton I may not be good but I'm slow...

My Blog: https://stuartsscalemodels.blogspot.com/
Locked

Return to “N.A. T-6 Texan / SNJ / Harvard GB”