VV's Condor gets flapping

Finish off those kits which are stalled on the workbench, languishing on the sidelines, or lurking on The Shelf of Doom.
Runs 1st to 30th November
GB Leaders are Dazzled and AndrewR
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5043
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

VV's Condor gets flapping

Post by VickersVandal »

Yes, another in the Biggles collection, but this is probably the pinnacle of Biggles model building for me. This represents the "Vickers Amphibian" used in Biggles and the Cruise of the Condor. If you have not read this book, DO SO NOW! It's a brilliant fusion of Indiana Jones and flying and easily my favourite from the series.

The kit is a Supermarine Seamew by Karaya in resin. It's about the closest thing to the silhouette in the illustrations. Ultimately it will be teamed with a Douglas PD-1 I also have, to complete a diorama from the final illustration of the book:
http://www.biggles.info/Details/02/Illustrations/;
A scene in which, with nothing else to hand, Algy brings down a plane load of machinegun toting gangsters using a well-flung oil can (it hits the centre-section, with predictable results). Tally-ho Algy! :mrgreen:

I started this years back and it has lain unloved for far too long. Here it is, with Biggles in the pilot seat, Algy mid-fling and passengers Biggles' archaeologist uncle Dickpa and Smythe the mechanic. The cockpit opening was moved back and as the Seamew is a military kite, all gunnery positions/scarff rings have been removed and filled.

Image

Can I finish it by the 30th? I certainly hope so. It deserves to be completed. I'll probably have to forego any wood effect on the hull.
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
AndrewR
In the basement lab
Posts: 24113
Joined: April 5th, 2011, 4:13 pm
Location: Ottawa, Ontario, The Great White North
Contact:

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by AndrewR »

Now that is a cool project! Good luck. :)
Up in the Great White North
User avatar
Stuart
Raider of the Lost Ark Royal
Posts: 19451
Joined: February 25th, 2013, 4:55 pm
Location: North Wales
Contact:

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by Stuart »

Looking forward to seeing this done!
Stuart Templeton I may not be good but I'm slow...

My Blog: https://stuartsscalemodels.blogspot.com/
ShaunW
NOT the sheep
Posts: 26188
Joined: November 26th, 2011, 6:11 pm
Location: Pontefract West Yorkshire

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by ShaunW »

This looks very interesting VV and I look forward to seeing more.
Doing - Tamiya 1/35th Universal Carrier.

Work is the curse of the modelling classes!
IPMS#12300
User avatar
splash
Senior Service Rotorhead
Posts: 13828
Joined: May 1st, 2011, 11:02 am
Location: Somerset England

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by splash »

This should be interesting to watch. I always enjoy your Biggles builds.

Regards Splash
My work bench is starting to look like Portsmouth Naval Dockyard.
User avatar
Dazzled
Modelling Gent and Scholar
Posts: 9592
Joined: October 1st, 2011, 11:08 pm
Location: Mid Glamorgan, South Wales
Contact:

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by Dazzled »

Great concept VV. I'm looking forward to watching this one develop.
COLD WAR S.I.G. LEADER

Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
User avatar
JamesPerrin
Looks like his avatar
Posts: 13695
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by JamesPerrin »

Karaya's Seaplanes are a bit lovely so will follow with interest!
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5043
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's Vickers Amphibian "Condor" (1/72 resin Karaya Seame

Post by VickersVandal »

Thanks all.

James, your Karaya build for the flying boat GB was an absolute inspiration. I will come nowhere near the quality of that but it has been one of the things that made me want to get back into this.


So, I finally had an hour or so of bench time. The cockpit is only designed for one so fitting both the figurines was a bit of a struggle but I managed it....sort of....

Image

I also threw on a bit of sand yellow as a primer to see if my sanding was up to scratch. Still needs some work :oops:
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
Dazzled
Modelling Gent and Scholar
Posts: 9592
Joined: October 1st, 2011, 11:08 pm
Location: Mid Glamorgan, South Wales
Contact:

Re: VV's Condor gets flapping

Post by Dazzled »

This is coming along nicely VV. It does look a bit cramped as you say.
COLD WAR S.I.G. LEADER

Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5043
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's Condor gets flapping

Post by VickersVandal »

November was a bad time for me for a GB :sad:
Very time poor. Anyway, I'll soldier on.
I wasn't happy with any of the browns I had for the fuselage so I've finally managed to get to my LMS to find a good match.

Image

But now I'm off for the weekend so nothing is likely to happen for a few days. Hopefully I'm not staring down the barrel of a DNF. We'll see....
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
AndrewR
In the basement lab
Posts: 24113
Joined: April 5th, 2011, 4:13 pm
Location: Ottawa, Ontario, The Great White North
Contact:

Re: VV's Condor gets flapping

Post by AndrewR »

VickersVandal wrote:November was a bad time for me for a GB :sad:
Very time poor. Anyway, I'll soldier on.
I wasn't happy with any of the browns I had for the fuselage so I've finally managed to get to my LMS to find a good match.

Image

But now I'm off for the weekend so nothing is likely to happen for a few days. Hopefully I'm not staring down the barrel of a DNF. We'll see....
I don't think we have DNF for this GB, we just have "Status Quo" :)
Up in the Great White North
User avatar
Dazzled
Modelling Gent and Scholar
Posts: 9592
Joined: October 1st, 2011, 11:08 pm
Location: Mid Glamorgan, South Wales
Contact:

Re: VV's Condor gets flapping

Post by Dazzled »

VickersVandal wrote:November was a bad time for me for a GB :sad:
Very time poor. Anyway, I'll soldier on.
I wasn't happy with any of the browns I had for the fuselage so I've finally managed to get to my LMS to find a good match.

Image

But now I'm off for the weekend so nothing is likely to happen for a few days. Hopefully I'm not staring down the barrel of a DNF. We'll see....
And while finishing is always nice, it's good to just make progress with a project too :) So don't sweat it.
COLD WAR S.I.G. LEADER

Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5043
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's Condor gets flapping

Post by VickersVandal »

Thanks gents. I'm making a bit of progress on it so I may get there. The struts are a bit of a nightmare to figure out, not being numbered since its a resin kit.
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
ShaunW
NOT the sheep
Posts: 26188
Joined: November 26th, 2011, 6:11 pm
Location: Pontefract West Yorkshire

Re: VV's Condor gets flapping

Post by ShaunW »

Nice one VV, keep at it as this is an interesting looking subject.
Doing - Tamiya 1/35th Universal Carrier.

Work is the curse of the modelling classes!
IPMS#12300
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5043
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's Condor gets flapping

Post by VickersVandal »

Well, I didn't get er done. This is the sum total I've managed to do, below.
Wings painted, hull painted and wood effect on struts.
Image

November has not been the tiniest bit kind to me in terms of modelling time.

Sigh..... :-|
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
Locked

Return to “Getting Things Done GB”