Martin's Seafire Ib *finished* & PRs IV & XI *finished*
Martin's Seafire Ib *finished* & PRs IV & XI *finished*
So, I'm gathering materials: the PRIV is a Sword kit and will be built oob; the PRXI is a cross kit involving the Airfix Mks IX and XIX using the bits left over from a previous MkXIV cross kit.
I thought I'd have a problem sourcing the Seafire, though. Never fear! A rummage in the stash turned up the old Airfix FAA club kit with a Seafire IIC in it. In reality, this is the old Spit MkVb with updated wings for the MkVc. You remember: the pre-Hornby chunky stuff! However, the original wings are there, together with bits for the hook recess and hook. Using these bits should give me a Ib. Sorted!
Regards,
Martin
I thought I'd have a problem sourcing the Seafire, though. Never fear! A rummage in the stash turned up the old Airfix FAA club kit with a Seafire IIC in it. In reality, this is the old Spit MkVb with updated wings for the MkVc. You remember: the pre-Hornby chunky stuff! However, the original wings are there, together with bits for the hook recess and hook. Using these bits should give me a Ib. Sorted!
Regards,
Martin
Re: Martin's Seafire Ib & PRs IV & XI
Hmmmm. My PC IS kaput. I can post from my mobile, but not sure about photos.
Martin R
"the 'R' stands for 'Representative'."
"the 'R' stands for 'Representative'."
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Martin's Seafire Ib & PRs IV & XI
I do all my posting by phone - I use the photobucket app and the camera phone - whilst not great for completed shots it's ok for wip - just switch the flash off and watch the wb and light.Martin R wrote:Hmmmm. My PC IS kaput. I can post from my mobile, but not sure about photos.
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
Re: Martin's Seafire Ib & PRs IV & XI
Fair enough. I'll give it a try then.
Martin R
"the 'R' stands for 'Representative'."
"the 'R' stands for 'Representative'."
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Martin's Seafire Ib & PRs IV & XI
Martin R wrote:Fair enough. I'll give it a try then.
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- AndrewR
- In the basement lab
- Posts: 24113
- Joined: April 5th, 2011, 4:13 pm
- Location: Ottawa, Ontario, The Great White North
- Contact:
Re: Martin's Seafire Ib & PRs IV & XI
I've been doing the same for a while too.Sir T wrote:Martin R wrote:Fair enough. I'll give it a try then.
Up in the Great White North
Re: Martin's Seafire Ib & PRs IV & XI
No progress, I'm afraid. Decided to watch Trapped instead.
However, as I appear to have sussed out how to upload photos on the mobile, I'll try to show some photos of the kits tonight. While rummaging in the stash, I found a freightdog PRXI resin conversion for the MkXIX, so I have another option for the MkXI as well as my IX/ XIX cross kit.
Regards
Martin
However, as I appear to have sussed out how to upload photos on the mobile, I'll try to show some photos of the kits tonight. While rummaging in the stash, I found a freightdog PRXI resin conversion for the MkXIX, so I have another option for the MkXI as well as my IX/ XIX cross kit.
Regards
Martin
Re: Martin's Seafire Ib & PRs IV & XI
OK, here are some photos: firstly, the PRIV from Sword. Very like the Seafire kits I've previously made. Only problem will be using the extended wingtips, necessitating a razor saw job, followed by judicious filling.
Next, we have the Seafire Ib:
using the old Spit Vb kit plus some of the bits from the Airfic Club boxing of the Seafire IIc.
I'll put the PRXI pics in my next post.
Regards,
Martin
Next, we have the Seafire Ib:
using the old Spit Vb kit plus some of the bits from the Airfic Club boxing of the Seafire IIc.
I'll put the PRXI pics in my next post.
Regards,
Martin
Re: Martin's Seafire Ib & PRs IV & XI
Right, the Spit PRXI choices:
Firstly, the IX XIX cross kit option:
I have added a resin seat and pointed tailfin, but would still need to scratch the bulged chin.
Alternatively, I could use the Freightdog conversion for the Airfix XIX:
This will entail some cutting and filling, but the bulged chin is part of the resin cowling. Decisions, decisions. Maybe, I'll try both!
Regards,
Martin
Firstly, the IX XIX cross kit option:
I have added a resin seat and pointed tailfin, but would still need to scratch the bulged chin.
Alternatively, I could use the Freightdog conversion for the Airfix XIX:
This will entail some cutting and filling, but the bulged chin is part of the resin cowling. Decisions, decisions. Maybe, I'll try both!
Regards,
Martin
Martin R
"the 'R' stands for 'Representative'."
"the 'R' stands for 'Representative'."
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Martin's Seafire Ib & PRs IV & XI
Um... correct me if I'm wrong but I'd do the IX & XIX cross kit and then use the XIX conversion nose on the mk.IX fuselage? Surely that would work as the rest of the fuselage rear of the firewall is the same length? - or am I missing something?
That way you'd have the XIX fuselage intact to mate with the IX wings? - delete the pressurized cockpit - what would that make?
Cheers
Stuart
That way you'd have the XIX fuselage intact to mate with the IX wings? - delete the pressurized cockpit - what would that make?
Cheers
Stuart
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
Re: Martin's Seafire Ib & PRs IV & XI
One of these....
XIVc
I did my XI with a IX fuselage and XIX wing then scratched the nose and added underwing cameras a fuel tank and broard chord rudder.
HTH
Gf
XIVc
I did my XI with a IX fuselage and XIX wing then scratched the nose and added underwing cameras a fuel tank and broard chord rudder.
HTH
Gf
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Martin's Seafire Ib & PRs IV & XI
Ah there you go - you can build a XIV!Gadfly wrote:One of these....
XIVc
I did my XI with a IX fuselage and XIX wing then scratched the nose and added underwing cameras a fuel tank and broard chord rudder.
HTH
Gf
That looks great GF.
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
Re: Martin's Seafire Ib & PRs IV & XI
Hi folks,
Already done a XIV!
http://uamf.org.uk/viewtopic.php?f=14&t=565&start=45.
The cross-kit has only the bits left over from that build (ie XIX wing / IX fuse). Might as well use those for a PRXI (waste not / want not), but I've got the very nice Freightdog PRXI set for the XIX base kit too . . .
regards,
Martin
Already done a XIV!
http://uamf.org.uk/viewtopic.php?f=14&t=565&start=45.
The cross-kit has only the bits left over from that build (ie XIX wing / IX fuse). Might as well use those for a PRXI (waste not / want not), but I've got the very nice Freightdog PRXI set for the XIX base kit too . . .
regards,
Martin
Martin R
"the 'R' stands for 'Representative'."
"the 'R' stands for 'Representative'."
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19451
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Martin's Seafire Ib & PRs IV & XI
Cool build Martin.Martin R wrote:Hi folks,
Already done a XIV!
http://uamf.org.uk/viewtopic.php?f=14&t=565&start=45.
The cross-kit has only the bits left over from that build (ie XIX wing / IX fuse). Might as well use those for a PRXI (waste not / want not), but I've got the very nice Freightdog PRXI set for the XIX base kit too . . .
regards,
Martin
I still think I'd use the bits left over AND the XIX conversion set (the nose anyway) to make your PR.XI.
Then you'd have a nice shiny XIX kit intact for future use
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- DavidWomby
- Modelling Gent and Scholar
- Posts: 11765
- Joined: May 1st, 2011, 8:09 pm
- Location: Florida, USA
Re: Martin's Seafire Ib & PRs IV & XI
Wow - you're doing three? Brave man.
David
David