VV's CNAC Curtiss Hawk III

Any subject - air, sea, ground - between the two World Wars, between June 29th 1919 through August 31st 1939.
This GB runs Oct 1 through 31 and your host is Arcwelder.
Locked
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5031
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

VV's CNAC Curtiss Hawk III

Post by VickersVandal »

OK, back from vacation and I can get into this.

One of my themes is the aircraft of the Chinese airforce (CNAC) used in the Sino-Japanes war of the 1930s (and extending into WW2). I used to pore over my brother's copy of Air Warfare as a kid and for some reason, this page always jumped out at me (I managed to claim the book eventually so now it's in my library :razz: :mrgreen: ).

Image

I am gradually building everything on that page, plus a few other CNAC here and there, including the Airfix new tool Flying Tigers Hawk.

Image

My GB entry is the Curtiss Model 68 Hawk III (why did Curtiss have to call EVERY aircraft they ever built "Hawk"?...) by Special Hobby in the scheme shown on the above page (2503), which is one of the decal options.

If I get time (unlikely, but you never know) I may start on the Dewoitine D.510 as part of this GB too.

Sort-of sprue shot...
Image

The bulkhead behind the seat had come adrift somewhere :evil: so I built a new one.

Image
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5031
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's CNAC Curtiss Hawk III

Post by VickersVandal »

Oooh...a handy build thread of this kit to refer to:

http://www.network54.com/Forum/644810/t ... 475073908/(View+All+Messages+in+this+Thread;)
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
JohnRatzenberger
Why is he so confused ?
Posts: 15727
Joined: April 5th, 2011, 3:42 pm
Location: Living on a sandbar - Nags Head, NC.

Re: VV's CNAC Curtiss Hawk III

Post by JohnRatzenberger »

Oh, good - the Hawks were beautiful ... well at least until the retracts made them look pregnant.
John Ratzenberger :???:
It's my model and I'll do what I want with it.
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5031
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's CNAC Curtiss Hawk III

Post by VickersVandal »

jRatz wrote:Oh, good - the Hawks were beautiful ... well at least until the retracts made them look pregnant.
Yeah - pregnant tummies look great on mums....not so much on fighter aircraft...
This one is definitely a low point on the aesthetics spectrum. Keeps things interesting though.

Not much more to report for the moment. Probably a few days before I can put time into it again.
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
iggie
Modelling Gent and Scholar
Posts: 23418
Joined: July 31st, 2013, 11:04 am
Location: North Somercotes, Lincolnshire
Contact:

Re: VV's CNAC Curtiss Hawk III

Post by iggie »

It looks a nice kit, as SpecialHobby boxings tend to be; do you get any resin parts as well as the PE & styrene?
Best wishes

Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
User avatar
fredk
Modelling Gent and Scholar
Posts: 6195
Joined: May 1st, 2012, 6:25 am
Location: Donaghadee, N'rn Ir'n

Re: VV's CNAC Curtiss Hawk III

Post by fredk »

Hows it coming along?
Al speling misteaks aer all mi own werk..
Its not just how good your painting is, its how good the touch-ups are too.
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5031
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's CNAC Curtiss Hawk III

Post by VickersVandal »

iggie wrote:It looks a nice kit, as SpecialHobby boxings tend to be; do you get any resin parts as well as the PE & styrene?
Yes, the engine is resin. Very nice moulding.


I closed up the fuselage today but it will be a while before I can post pics as my phone line has died so I can't go online with the laptop - only occasionally with the phone when there's free WiFi about.
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
User avatar
VickersVandal
Modelling Gent and Scholar
Posts: 5031
Joined: October 4th, 2012, 3:37 am
Location: Sydney, Australia

Re: VV's CNAC Curtiss Hawk III

Post by VickersVandal »

Sorry, people, I am calling an early DNF on this. I have my church weekend away this weekend so no opportunity to do anything and it has been workmageddon for 2 weeks straight and will remain so for at least another week with most evening hours required for work time to meet deadlines.

I hate DNFs, but I need to face facts. It's not realistic to get this done in time.
Must.....build....ALL the Sopwith Camels!...

My Biggles Model display website: https://tinyurl.com/y74ydzae
Locked

Return to “'tween the Wars”