Mr Marky goes to Washington***Finished***
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10817
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Mr Marky goes to Washington
Nice work with the paint variation. Nice looking aeroplane the B-29.
Nigel
Nigel
Re: Mr Marky goes to Washington
Thanks Clash, it does need tidying up but it seems to have successfully broken up the single colour. I've never build a B-29 but this was worth the wait. Got the old Airfix one to do!!. It is a nice aeroplane, shows a bit of a leap forward in technology and the like.Clashcityrocker wrote:Nice work with the paint variation. Nice looking aeroplane the B-29.
Nigel
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
Re: Mr Marky goes to Washington
Decals are going on, thought they would be easier to do before adding the wings. As I am not using the kit decals I needed to combine the spares box and home made decals using waterslide decal paper (I get mine from Crafty Computer Paper, not connected to me just what I use and worth a go IMHO). Unfortunately my delight at how well they came out was trashed when I went to put the first number under the wing and realised I had used white background paper rather than clear , so a re-do is in order.... Progress so far with spares box decals.
The tail markings are intended to be temporary (although I'll probably be too lazy to come back and change them), as they are a little too big. The WF512 should be higher up and the fin flash should be farther back but it looks passable (I hope!!).
I've noticed this before but the silver paint seems to react when varnish is put on and smears, I think you can just see it on the number 5 on the tail. Might have to spray varnish on silver.
My home made decals.... (I had the WF512 which I photocopied enough to make a sheet with sufficient decals to do three WF512's).
The tail markings are intended to be temporary (although I'll probably be too lazy to come back and change them), as they are a little too big. The WF512 should be higher up and the fin flash should be farther back but it looks passable (I hope!!).
I've noticed this before but the silver paint seems to react when varnish is put on and smears, I think you can just see it on the number 5 on the tail. Might have to spray varnish on silver.
My home made decals.... (I had the WF512 which I photocopied enough to make a sheet with sufficient decals to do three WF512's).
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
- iggie
- Modelling Gent and Scholar
- Posts: 23437
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Mr Marky goes to Washington
Coming along nicely Mark. I can sympathise regarding the white decal paper....guess how!!
What varnish are you using when brushing? I've not had a problem with brushing either Xtracrylix varnishes, or Winsor & Newton over silvers from various manufacturer's (all acrylic). The only time I did have a problem was rattle can Humbrol gloss varnish, which trashed a whole Bae Hawk
What varnish are you using when brushing? I've not had a problem with brushing either Xtracrylix varnishes, or Winsor & Newton over silvers from various manufacturer's (all acrylic). The only time I did have a problem was rattle can Humbrol gloss varnish, which trashed a whole Bae Hawk
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Re: Mr Marky goes to Washington
I won't ask, just sit in silent sympathy!!.iggie wrote:Coming along nicely Mark. I can sympathise regarding the white decal paper....guess how!!
What varnish are you using when brushing? I've not had a problem with brushing either Xtracrylix varnishes, or Winsor & Newton over silvers from various manufacturer's (all acrylic). The only time I did have a problem was rattle can Humbrol gloss varnish, which trashed a whole Bae Hawk
I'm actually probably being cheap and using what I have which is Humbrol Gloss 35. Seems to have improved (along with the Matt 49), but seems dirty when brushing on decals like this. Actually it's probably my brush that is dirty!! I might try the Xtracrylix if you think they are worth having a go. Don't often print my own decals lately but still have enough paper for a while yet.
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
- iggie
- Modelling Gent and Scholar
- Posts: 23437
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Mr Marky goes to Washington
Varnish-wise I tend to use the Xtracrylix gloss pre decals, and then use the Winsor & Newton to finish, in gloss, matt or satin to suit the subject. The Matt especially is excellent and seems to suck any shine out of the model as it dries!MarkyM607 wrote:I won't ask, just sit in silent sympathy!!.iggie wrote:Coming along nicely Mark. I can sympathise regarding the white decal paper....guess how!!
What varnish are you using when brushing? I've not had a problem with brushing either Xtracrylix varnishes, or Winsor & Newton over silvers from various manufacturer's (all acrylic). The only time I did have a problem was rattle can Humbrol gloss varnish, which trashed a whole Bae Hawk
I'm actually probably being cheap and using what I have which is Humbrol Gloss 35. Seems to have improved (along with the Matt 49), but seems dirty when brushing on decals like this. Actually it's probably my brush that is dirty!! I might try the Xtracrylix if you think they are worth having a go. Don't often print my own decals lately but still have enough paper for a while yet.
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Re: Mr Marky goes to Washington
I'll try that although only one place here does any Windsor and Newton and it's a bit pricey but perhaps you get what you pay for and all that. I've used Matt 49 on the wing decals and it seemed okay, I did pre-decal the wings with Gloss 35 so it may have sealed the silver paint. That's my expert (!?) theory anyway!!. Here are the wing decals and the mass of weight I've put in the forward bomb-bay. Turns out it needed 70 grams to get it to sit on it's nose wheel, I put in another 10 grams just to be sure....
(If only Chuck Finley hard warned me earlier..... )
Undercarriage worked out and installed....
Nose wheel and the mass of weight added. Hopefully it will still be enough when the wheels are added and they don't change the angle of the plane too much!!
(If only Chuck Finley hard warned me earlier..... )
If you build it with a closed bomb-bay, you should be able to get it to sit on it's nose gear by filling the forward bomb bay with lead shot. Otherwise, it WILL be a tail sitter.
Chuck Finley wrote:Don't forget adding as much weight as you can fit in the engine nacelles. I had to do that to my B-29, B-50A, and YC-97 to keep them from being tail sitters.
Undercarriage worked out and installed....
Nose wheel and the mass of weight added. Hopefully it will still be enough when the wheels are added and they don't change the angle of the plane too much!!
I think I read that the tail of the B-50 was even bigger!!.iggie wrote:Good work so far Mark; it certainly is a big lump and that tail plane is mahooosive
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
-
- NOT the sheep
- Posts: 26188
- Joined: November 26th, 2011, 6:11 pm
- Location: Pontefract West Yorkshire
Re: Mr Marky goes to Washington
Just been catching up with this build as I've been on me hols and it is really coming together well, Mark. Kudos to you for having a go at your own decals, as of yet that is something I've never tried. I like the multi-tone of the NMF too. Great stuff.
Doing - Tamiya 1/35th Universal Carrier.
Work is the curse of the modelling classes!
IPMS#12300
Work is the curse of the modelling classes!
IPMS#12300
- iggie
- Modelling Gent and Scholar
- Posts: 23437
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Mr Marky goes to Washington
The GB has been extended to Sunday 6th August Mark; I hope this will allow for your finishing touches to this awesome build!
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Re: Mr Marky goes to Washington
Thanks Shaun, the decals are pretty basic efforts but do allow codes and the like to be changed in a build. I usually stick to letters and roundels, although my printer is low level clever so roundels can show a slightly blocky edge!. Doesn't take much painting over if you can match the colour.ShaunW wrote:Just been catching up with this build as I've been on me hols and it is really coming together well, Mark. Kudos to you for having a go at your own decals, as of yet that is something I've never tried. I like the multi-tone of the NMF too. Great stuff.
That's good. Haven't got to checking the GB section yet, only the Bomb bay doors to paint actually. Not overly happy with the tops of the wings but it will have to do for now. War weary perhaps!? Those Yanks will sell anything!! (I know the B-29's were 'borrowed').iggie wrote:The GB has been extended to Sunday 6th August Mark; I hope this will allow for your finishing touches to this awesome build!
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
Re: Mr Marky goes to Washington
She's done but I will be busy work wise until Thursday so pics will be done then. Apart from the paint/varnish problem this has been enjoyable. I should mention in regard to the paint problem that it is plastic kote from a spray can, not sure if that is a factor.
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
- gnomemeansgnome
- Modelling Gent and Scholar
- Posts: 5269
- Joined: July 16th, 2013, 4:03 pm
- Location: No Fun City
Re: Mr Marky goes to Washington***Finished***
Really great work so far Marky, wow! Stoked to see the finished product. Might have to build its own hangar now.
Ego no habeo consilium.
ICBM = Insatiable Collector and Builder of Models
ICBM = Insatiable Collector and Builder of Models
Re: Mr Marky goes to Washington***Finished***
Thanks, it's something of a looks better in pictures than close up but it hasn't turned out too bad after all. I did have to leave it on the build space table because I had no shelf space that would house it until it was hung up from the ceiling!!!. AND, all four props go round!, I know some people aren't bothered by this sort of thing but I've always liked them to at least move. I thought I'd glued three of the four to a stop, but the other three took to ome turning and are good now.gnomemeansgnome wrote:Really great work so far Marky, wow! Stoked to see the finished product. Might have to build its own hangar now.
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
Re: Mr Marky goes to Washington***Finished***
Okay, here goes. Due to the size/width etc. of a B-29, my pics are a little 'distant' but it just makes the plane look better!!!!.
Hoping to return to modelling sometime this year!!
Owner of Marky's Model Emporium since 2013!.
Owner of Marky's Model Emporium since 2013!.
- gnomemeansgnome
- Modelling Gent and Scholar
- Posts: 5269
- Joined: July 16th, 2013, 4:03 pm
- Location: No Fun City
Re: Mr Marky goes to Washington***Finished***
Very nice! What a behemoth!
Ego no habeo consilium.
ICBM = Insatiable Collector and Builder of Models
ICBM = Insatiable Collector and Builder of Models