Mirage III vs Mig-15

Discussion and the builds for the SMW 2011 CBK display.

Moderator: JamesPerrin

User avatar
mattbacon
Too Cheerful To Be A JMN
Posts: 2308
Joined: April 11th, 2011, 1:54 pm

Mirage III vs Mig-15

Post by mattbacon »

Just to prove I _have_ been working on how to do this... in the background:

The set-up:
Image

and with a more "box art" crop:
Image

...and yes, before some smart-aleck mentions it, I know that's a Matchbox G-91Y, not an Airfix Mirage III ;-P But it's a 1/72 jet of about the right size that I have to hand. The brown base is a sheet of A3, and the "Mirage" is over the front left corner. I'm thinking either a camouflaged brass wire pylon at that point, or a curved piece of acrylic coming out of the side of the base and into the Mirage's jet pipe...

That's a pair of Aircraft in Miniature 1/200 MiGs, and a pair by Raiden Miniatures in 1/285. The "ground" will slope up as shown, and transition smoothly into the backdrop via an "infinity wall" effect. I've got another AiM MiG to attack for the exploding one (so there's a spare in case it goes wrong). They'll all need undercarts, but I plan to use wire legs that can pin through "wheels" into the base. (with doors on the nearer pair). I'm going to "motion blur" the base in the corner below the Mirage. The rockets being fired will be clear fishing line coming out of the launcher, painted at the far ends to represent the rocket, flame and smoke trail...

Now then... has any one GOT an Airfix Mirage III that they'd like to trade for something? My sources are coming up dry, and I'm baulking at buying £10 starter set or a £25+ original Dogfight Double to get one!

bestest,
M.
User avatar
ejsnotgrass
The Bug Has Well And Truly Bitten
Posts: 280
Joined: May 2nd, 2011, 6:59 am

Re: Mirage III vs Mig-15

Post by ejsnotgrass »

PM me your addy as I have one spare.
User avatar
JamesPerrin
Looks like his avatar
Posts: 13619
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: Mirage III vs Mig-15

Post by JamesPerrin »

Iain's our one stop shop :grin:

It's going to look great Matt. How big do you think the whole thing will be?
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:1) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
JamesPerrin
Looks like his avatar
Posts: 13619
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: Mirage III vs Mig-15

Post by JamesPerrin »

Brews wrote:I had a look for 1:200 Hunters at "Aircraft in Miniature" without any luck, and I didn't fancy the 1:285 Hunter by Raiden. Do you know of any 1:200 Hunters, Matt?

No hunters as yet but a source on tiny models: http://www.the-one-true-scale.co.uk/; . Nice but pricey.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:1) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
mattbacon
Too Cheerful To Be A JMN
Posts: 2308
Joined: April 11th, 2011, 1:54 pm

Re: Mirage III vs Mig-15

Post by mattbacon »

A bit more progress...

Image
Image
Image

The idea of the angled base it to try and "force" a viewpoint, so that people automatically end up looking at it for the best "box-art" perspective. The front left corner with the pylon will be the most motion-blurred, with the effect diminishing the further "into" the diorama you get. The main "facing" will be covered by the infinity wall effect with the base and background. I thought I'd probably reproduce some "box titles" and logos on the other walls, particularly a "Dogfight Double: Mirage vs Mig 15" title on the front right triangular cutaway face. The backdrop may be cut down a bit.

At the moment it's 12" wide, 10" front to back and 9" high... though it'll overlap the base a bit.

This is the "box art" crop:
Image

It's interesting watching the ways different people approach this...

I'm not worried about building a 1/72 Mirage, but the things that do worry me, in order, are:
1) How to force the perspective
2) How to achieve the graduated motion blur on the base
3) Where to find smaller scale Mig 15s
4) How to do the explosions and rockets
5) How to paint/print/whatever the backdrop
6) Where to find 1/200 scale little guys...

So, I'm starting with all the things that bother me! If I have to build a Mirage in two weeks before SMW, so be it, but I want a lot of runs at the bits that bother me! (1) and (3) are sorted, Migrant's given me some good advice on (2), the lab is full of experiments on (4). Lots to do on (5) and (6)...

But everyone else seems to be building the "focus kit" first... am I the odd one out?

bestest,
M.
User avatar
PaulBradley
Staring out the window
Posts: 21115
Joined: April 6th, 2011, 3:08 pm
Location: Flagstaff, AZ

Re: Mirage III vs Mig-15

Post by PaulBradley »

Sounds like a plan, Matt. With my Islander, I have the advantage in that the model is already basically complete; it will be different if I get time to do the Blenheim....

For the 1/200 figures, there are railway Z gauge (1/220) figures by Preiser - these for example:

http://www.hobbylinc.com/htm/psr/psr80908.htm;
Paul

За демократію і незалежний Україну

"For Democracy and a Free Ukraine"
User avatar
mattbacon
Too Cheerful To Be A JMN
Posts: 2308
Joined: April 11th, 2011, 1:54 pm

Re: Mirage III vs Mig-15

Post by mattbacon »

Time to get started seriously now! With Mike Grant's SAMI article to hand, and some sage advice from James P, this is going to be my first rescribed kit!

Image

The bench with tools to hand - needle in pin vice, dymo tape, flexible rulers, P-cutter... I do also have some proper 1/72 plans, off-camera.

Image

WiP.. the upper wing shows the heavy raised lines and some scribing in progress; the lower wing is done. Given the diorama scenario, I felt fairly safe in practising on the lower wing!

Image

Unforgiving close up of lower wing. The gear doors from the kit were pretty well unusable, so these are plastic card replacements...

bestest,
M.
User avatar
JamesPerrin
Looks like his avatar
Posts: 13619
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: Mirage III vs Mig-15

Post by JamesPerrin »

The base is looking cracking Matt. Could you scratch build smaller Mig 15s? Tapered tube with some wings stuck on?

Looks like you've got the hand of the re-scribing too.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:1) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
mattbacon
Too Cheerful To Be A JMN
Posts: 2308
Joined: April 11th, 2011, 1:54 pm

Re: Mirage III vs Mig-15

Post by mattbacon »

This rescribing lark is a pain in the whatsit. I won't be doing this again in a hurry...

Image

Of course, I had to decide to clean up the intakes as well:

Image

Bullets sanded off their backing, intake walls built, splitter plates fitted, and bullets re-attached...

Image
Image

Robbed pilot in position on robbed seat in fabricated cockpit... more to come, including sight.

Image

Some hope here...

Slow, slow progress, but at least something is happening!

bestest,
M.
User avatar
IrishAir
Active Participant
Posts: 516
Joined: May 1st, 2011, 12:02 am
Location: Cork, Ireland

Re: Mirage III vs Mig-15

Post by IrishAir »

Great work on that pilot Matt, can't wait to see this dio finished.

Cheers,
Paul
There's always room for improvement...... and I got plenty of space to fill
User avatar
JamesPerrin
Looks like his avatar
Posts: 13619
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: Mirage III vs Mig-15

Post by JamesPerrin »

Nice robbing Matt did you pick them up during the riots ;-)
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:1) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
mattbacon
Too Cheerful To Be A JMN
Posts: 2308
Joined: April 11th, 2011, 1:54 pm

Re: Mirage III vs Mig-15

Post by mattbacon »

Just in case anyone thought I'd ground to a complete halt... I have been away a fair bit, though.

Image
Image

And at least now it's a Mirage in the mock-up!

Image

bestest,
M.
User avatar
JamesPerrin
Looks like his avatar
Posts: 13619
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: Mirage III vs Mig-15

Post by JamesPerrin »

The rescribed panel lines look pretty dam good under the the coat of silver.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:1) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
mattbacon
Too Cheerful To Be A JMN
Posts: 2308
Joined: April 11th, 2011, 1:54 pm

Re: Mirage III vs Mig-15

Post by mattbacon »

Thanks, James!

And now, thanks to the miracles of Photoshop:

Image

No planes! I'm not sure how much of the foreground I need, and how much I'm going to paint over polyfilla, but I thought I might as well do the whole thing while I was at it... I may also need to extend the sky upwards when I try it on the base...

bestest,
M.
User avatar
PaulBradley
Staring out the window
Posts: 21115
Joined: April 6th, 2011, 3:08 pm
Location: Flagstaff, AZ

Re: Mirage III vs Mig-15

Post by PaulBradley »

Very good - I'm doing the same with my two. Photoshop is such a boon for this sort of thing.
Paul

За демократію і незалежний Україну

"For Democracy and a Free Ukraine"
Locked

Return to “SMW 2011 - Classic Box Art”