Page 1 of 1

How long before attaching masking tape to a painted surface

Posted: June 4th, 2017, 10:42 am
by billyb_imp
Having painted the underside of my Hurricane Mk1 yesterday morning, I had hoped this morning, to put masking tape to protect the underside from overspray but on closer looking at it this morning it needs a little bit more work on the underside leading / trailing edges of each wing.

So having planned on leaving it for 24 hours, it is now re-painted where required and i'm left kicking my heels, my question, how long generally do you leave the paintwork before attaching masking tape / applying the 2nd camouflage colour (different colour)

Re: How long before attaching masking tape to a painted surf

Posted: June 4th, 2017, 12:06 pm
by iggie
I use acrylic paint so tape can be applied after an hour or so in my experience, but enamel will be at least 24 hours I guess

Re: How long before attaching masking tape to a painted surf

Posted: June 4th, 2017, 1:40 pm
by billyb_imp
iggie wrote:I use acrylic paint so tape can be applied after an hour or so in my experience, but enamel will be at least 24 hours I guess
Thanks iggie, im also using acrylic, so will get back on the job this afternoon, its had 3 hours so far.

Re: How long before attaching masking tape to a painted surf

Posted: June 5th, 2017, 1:29 am
by JohnRatzenberger
I've gotten burnt too many times -- 24 hours is a nice number for paint to be fully dried, glue to be fully cured, etc ....

Let experience be your guide and remember it may not be the paint's fault, the undersurface may not have been clean ....