OK, chaps, I have a Beaufighter on short finals. I have cut out the landing lights in one of the wing leading edges, backed it with styrene sheet, and added a couple of 'Little Cars' lenses. I now need to 'glaze' it and, due to the interior, I'm not going to use solid blocks of clear styrene.
I believe my choices are to use either cling film or sellotape over the outside. Does anyone have any good advice as to how they use either of these techniques, please? Particularly interested in how to cut cling film to shape and how to avoid fingerprints on sellotape.
Many thanks in advance.
regards,
Martin
Advice needed - 'glazing' landing lights
- AndrewR
- In the basement lab
- Posts: 24064
- Joined: April 5th, 2011, 4:13 pm
- Location: Ottawa, Ontario, The Great White North
- Contact:
Re: Advice needed - 'glazing' landing lights
Jim (Jagewa) is the man to explain the cling film technique Martin.
Up in the Great White North
Re: Advice needed - 'glazing' landing lights
Thanks, Andrew.
Jim . . . . !
Jim . . . . !
regards,
Martin
Jim . . . . !
Jim . . . . !
regards,
Martin
- Jagewa
- Modelling Gent and Scholar
- Posts: 2752
- Joined: April 6th, 2011, 2:18 am
- Location: Christchurch, New Zealand
- Contact:
Re: Advice needed - 'glazing' landing lights
Eh, eh, stop shouting, you woke me up..
I find to cut the clingfilm, I get smallish piece lay it on the cutting mat, and use a sharp blade to cut press down on it to cut the clingfilm, I make it a good couple of mm over size. The edges are so thin with the clingfilm they really don't stand out much.
For the double lights, you really need the support between, as the clingfilm won't span with out sagging.
Boxed in with 'lights'
I use Klear to stick it on, brush a bit on the top edge and then lay the clingfilm on, it'll want to wrap and stay down.
then I use a brush with Klear on, to touch the sides and bottom edge, and it'll hold the rest down.
To tidy the edges where the Klear is glossy I paint a bit of flat coat on them.
Sometimes you end up with a wrinkle, but they are so fine it's hard to notice, and it's easy to pull off and redo.
I've used the tape method a couple of times as well, but, I'm used to the clingfilm way and like how thing it is.
Hope this helps.
Cheers
Jim
I find to cut the clingfilm, I get smallish piece lay it on the cutting mat, and use a sharp blade to cut press down on it to cut the clingfilm, I make it a good couple of mm over size. The edges are so thin with the clingfilm they really don't stand out much.
For the double lights, you really need the support between, as the clingfilm won't span with out sagging.
Boxed in with 'lights'
I use Klear to stick it on, brush a bit on the top edge and then lay the clingfilm on, it'll want to wrap and stay down.
then I use a brush with Klear on, to touch the sides and bottom edge, and it'll hold the rest down.
To tidy the edges where the Klear is glossy I paint a bit of flat coat on them.
Sometimes you end up with a wrinkle, but they are so fine it's hard to notice, and it's easy to pull off and redo.
I've used the tape method a couple of times as well, but, I'm used to the clingfilm way and like how thing it is.
Hope this helps.
Cheers
Jim
Re: Advice needed - 'glazing' landing lights
Jim,
Fantastic! Thanks for that. I'll give it a go and let you know what happens.
regards,
Martin
Fantastic! Thanks for that. I'll give it a go and let you know what happens.
regards,
Martin
- Jagewa
- Modelling Gent and Scholar
- Posts: 2752
- Joined: April 6th, 2011, 2:18 am
- Location: Christchurch, New Zealand
- Contact:
Re: Advice needed - 'glazing' landing lights
You're welcome Martin, looking forward to your finished Beaufighter.
Cheers
Jim
Cheers
Jim
- AndrewR
- In the basement lab
- Posts: 24064
- Joined: April 5th, 2011, 4:13 pm
- Location: Ottawa, Ontario, The Great White North
- Contact:
Re: Advice needed - 'glazing' landing lights
Great "How to", Jim. I'll have a go at that myself . Sometime...
Cheers
Andrew
Cheers
Andrew
Up in the Great White North
- PaulBradley
- Staring out the window
- Posts: 21201
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Advice needed - 'glazing' landing lights
Cool technique, Jim - there are a number of types that could benefit from this.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
Re: Advice needed - 'glazing' landing lights
love that clingfilm tech, would never have thought of it !
- Nax
- Modelling Gent and Scholar
- Posts: 1193
- Joined: December 26th, 2011, 2:09 am
- Location: Wagga, Australia
Re: Advice needed - 'glazing' landing lights
G'day Martin, I'm probably too late posting but this is the way I have done it "once" I will do it again on the right build. I got this tip from one of Mike Grants "side bars" in a build article.
I cut the wings out, made some lights from sprue and after fitting I put a "Tamiya tape" frame around the area I wanted to fit the light. Carefully stuck a section of tape on and the cut around the edge of the tape to leave a clear lense over the light.
I only took one picture when I was doing this step sorry.
Hope I have been of help to you. Nax
I cut the wings out, made some lights from sprue and after fitting I put a "Tamiya tape" frame around the area I wanted to fit the light. Carefully stuck a section of tape on and the cut around the edge of the tape to leave a clear lense over the light.
I only took one picture when I was doing this step sorry.
Hope I have been of help to you. Nax
Steve/Nax
Enjoying trying to make them look real.
Enjoying trying to make them look real.
- splash
- Senior Service Rotorhead
- Posts: 13828
- Joined: May 1st, 2011, 11:02 am
- Location: Somerset England
Re: Advice needed - 'glazing' landing lights
Thats neat I must try both ways.
Regards Splash
Regards Splash
My work bench is starting to look like Portsmouth Naval Dockyard.