Airfix 1/72 Stuka Ju87/B **FINISHED**
Moderator: JamesPerrin
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
Anyone got a clear pic of what the front of the square in take on the starboard side looks like. Most of the pics I can find are form the port side or are a different mark with a round intake. I want to know if it should have a grill flush, inset or none at all.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
Re: Airfix 1/72 Stuka Ju87/B
Besting 60 years of mediocre building of average kits in the stand off scale
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
Cheers Jeff, for the lack of a better pic I'll scratch some grill lines into the front of it.
The canopy has finely raised panel lines marking the edge of the framing rather than the usual raised framing. Though the lines are more to scale they are a buggger to find under masking tape so I was hoping to report my first successful use of parafilmM. However dispite following Mike Grants SAMi article I didn't have much luck - I think my roll of parafilm is too old as it bloomed white in places on stretching. It would adhere fine in some areas but not in others, the tiny window panes not helping. I will say though it cuts very easily without the snags that you get with masking tape.
I gave up and reverted to masking tape in the end. I could just see the framing and I wanted to get it done while we still had good weather for spraying primer. Two one hour sessions later masking done but it's now Wednesday and it's been raining all day.
Also note the bomb. I made a complete hash of thinning the fins so removed the damaged pair and then made a complete hash of cutting a slot for a new one. Shims of plastic and filler required - no one will ever know.
The canopy has finely raised panel lines marking the edge of the framing rather than the usual raised framing. Though the lines are more to scale they are a buggger to find under masking tape so I was hoping to report my first successful use of parafilmM. However dispite following Mike Grants SAMi article I didn't have much luck - I think my roll of parafilm is too old as it bloomed white in places on stretching. It would adhere fine in some areas but not in others, the tiny window panes not helping. I will say though it cuts very easily without the snags that you get with masking tape.
I gave up and reverted to masking tape in the end. I could just see the framing and I wanted to get it done while we still had good weather for spraying primer. Two one hour sessions later masking done but it's now Wednesday and it's been raining all day.
Also note the bomb. I made a complete hash of thinning the fins so removed the damaged pair and then made a complete hash of cutting a slot for a new one. Shims of plastic and filler required - no one will ever know.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- BlohmWolf
- Modelling Gent and Scholar
- Posts: 2355
- Joined: May 15th, 2013, 11:21 pm
- Location: Down under, TAS.
Re: Airfix 1/72 Stuka Ju87/B
I made one of these when I first got into moddeling. The internal pieces are surpisingly nice for an old kit.
"Can not finish a model at all"
"You can get more of what you want, with a kind word and a wallet, than just a kind word".
Currently Building: FROG Wildcat, Fokker DR1 Red baron and some other things...
"You can get more of what you want, with a kind word and a wallet, than just a kind word".
Currently Building: FROG Wildcat, Fokker DR1 Red baron and some other things...
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
Over the last few weeks I got a primer coat on and then made a pigs ear of of the initial colours. I did the underside in pale blue RLM 65 and then realised I should have done the yellow nose and tail first as they would need masking off before any of the upper camo was done. Well I cut corners and ended up with a lot of yellow overspray on the RLM65. I finally got round to touching it up tonight. I've also tried to copy Softscience's lovely finishes and added some lightened RLM65 in streaks and to the middle of panels to add some subtle variation.
I think I've got it right in that it isn't noticeable but the underside doesn't look a solid block of colour.
I think I've got it right in that it isn't noticeable but the underside doesn't look a solid block of colour.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- Dirkpitt289
- NUMA's Auto Mechanic
- Posts: 8724
- Joined: May 2nd, 2011, 1:55 am
- Location: New jersey USA
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
Looks like one heck of an old kit. I like watching these old ones come together
.... Dirk
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
Taken a few evening breaks from a mad bout of DIYing and gotten on with the spraying the splinter pattern. As the instructions suggest only a single colour I had a scout around the internet till I found someone else's Stuka with the standard splinter pattern from which I could copy.
I've again tried to emulate Softscience's beautiful subtle shading by roughly overspraying panels with lighter coat the the base colours. I think mine is too subtle as I can barely see it in reality let alone the photo.
I've again tried to emulate Softscience's beautiful subtle shading by roughly overspraying panels with lighter coat the the base colours. I think mine is too subtle as I can barely see it in reality let alone the photo.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- TomW
- Modelling Gent and Scholar
- Posts: 2279
- Joined: May 1st, 2011, 8:09 am
- Location: Devizes, Wiltshire
Re: Airfix 1/72 Stuka Ju87/B
Looking good James, there's something so evocative about yellow nosed Luftwaffe machines, definitely my favorite of all the schemes available.
Regards
Tom
Regards
Tom
Veni, Venari, Vamoosi
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
- PaulBradley
- Staring out the window
- Posts: 21216
- Joined: April 6th, 2011, 3:08 pm
- Location: Flagstaff, AZ
Re: Airfix 1/72 Stuka Ju87/B
Subtle is better. Looks good.
Paul
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
За демократію і незалежний Україну
"For Democracy and a Free Ukraine"
-
- Modelling Gent and Scholar
- Posts: 4422
- Joined: May 1st, 2011, 11:14 am
- Location: Doncaster, Socialist Republic of South Yorkshire.
Re: Airfix 1/72 Stuka Ju87/B
Looks great James, whose paints have you used for the splinter?
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
Gunze Sanyo acrylics, thinned with IPA.shangos70 wrote:Looks great James, whose paints have you used for the splinter?
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B
It's been a busy few weeks and despite haveing two weeks off work recently I got zero time for modelling. The last couple of weeks though I've made an effort to just do 10 mins or so here and there to move projects along. I finally got this one done last night.
I used the Airfix decals on which the white was a little out of register though I didn't realise this until placing the fuselage serial and crosses. The crosses were well off, I gut them away from the serials and put them back on the backing paper so I could match some from the spare box. I couldn't find any of the right size though and had trimmed the old one down thank bod I put them on the backing paper as I was able to resoak and apply them without mishap! In other places I could touch any exposed white edges with paint. Swasikas were added from a SAM sheet, the Airfix decals actually settled down better over the raised detail as they were nice and thin.
Machine gun on the wings were replaced with brass tube. The landing lighting was stamped from thick foil and polythene used to cover it. The glazing for the rear gun had been left in that special safe place that no one can remember where it is and so I was forced to make a new one.
Photo show some accumulated dust which point to how long this has been sat on my workbench however it's been an enjoyable build. I really like the kit I think the surface detail looks right, giving it a solid tank like appearance.
I used the Airfix decals on which the white was a little out of register though I didn't realise this until placing the fuselage serial and crosses. The crosses were well off, I gut them away from the serials and put them back on the backing paper so I could match some from the spare box. I couldn't find any of the right size though and had trimmed the old one down thank bod I put them on the backing paper as I was able to resoak and apply them without mishap! In other places I could touch any exposed white edges with paint. Swasikas were added from a SAM sheet, the Airfix decals actually settled down better over the raised detail as they were nice and thin.
Machine gun on the wings were replaced with brass tube. The landing lighting was stamped from thick foil and polythene used to cover it. The glazing for the rear gun had been left in that special safe place that no one can remember where it is and so I was forced to make a new one.
Photo show some accumulated dust which point to how long this has been sat on my workbench however it's been an enjoyable build. I really like the kit I think the surface detail looks right, giving it a solid tank like appearance.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- TomW
- Modelling Gent and Scholar
- Posts: 2279
- Joined: May 1st, 2011, 8:09 am
- Location: Devizes, Wiltshire
Re: Airfix 1/72 Stuka Ju87/B **FINISHED**
Thats one mighty fine looking Stuka James, great result and im looking forward to seeing it on the table in a few weeks.
Regards
Tom
Regards
Tom
Veni, Venari, Vamoosi
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
Coastal Command SIG Leader 2012 - 2016
We'll call him Dinghy Watts...... - Paul Bradley
2016 A:B = 29:11
2015 A:B = 38:14
2014 A:B = 25:9
2013 A:B = 20:17
2012 A:B = I didn't keep score
2011 A:B = 39:11
2010 A:B = 51:10
- JamesPerrin
- Looks like his avatar
- Posts: 13692
- Joined: April 5th, 2011, 8:09 pm
- Location: W. Yorkshire
- Contact:
Re: Airfix 1/72 Stuka Ju87/B **FINISHED**
Cheers Tom, I also remember to put the aerial wires on by then
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
- Clashcityrocker
- Modelling Gent and Scholar
- Posts: 10818
- Joined: May 1st, 2011, 12:31 am
- Location: Adelaide. South Australia
Re: Airfix 1/72 Stuka Ju87/B **FINISHED**
Nicely finished Stuka.
Nigel
Nigel