Fred's Breakfast Bar
Re: Fred's Breakfast Bar
Fred,
The floats look great to me. I think the rivets soaking up the wash makes it look darker than you would like but to me it is fine. Especially with all the detail on the upper surface. I also think that in a way the weight in the front of the float actually goes to your advantage as it moves the center of gravity forward toward the base of the catapult.
What about adding the oil paint directly to the water after you put the float into the level you want. That way the oil paint would only transfer to the top edge of the water and would not stick to the underside when you pull it out as it is already covered with water. Of course what ever way you do it a test would be required before working on the magnificent paint job you have done so far.
The floats look great to me. I think the rivets soaking up the wash makes it look darker than you would like but to me it is fine. Especially with all the detail on the upper surface. I also think that in a way the weight in the front of the float actually goes to your advantage as it moves the center of gravity forward toward the base of the catapult.
What about adding the oil paint directly to the water after you put the float into the level you want. That way the oil paint would only transfer to the top edge of the water and would not stick to the underside when you pull it out as it is already covered with water. Of course what ever way you do it a test would be required before working on the magnificent paint job you have done so far.
Paul
This is it. The moment we should have trained for.
This is it. The moment we should have trained for.
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19415
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Fred's Breakfast Bar
Wow! Very nice.
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
Re: Fred's Breakfast Bar
Good day, all!
Paul, I guess you're right about the c of g issue. But one way or another, that catapult's going to be holding a fair bit of weight!
Sir T, Thanks for the kind comment!
I experimented with the dirty waterline idea some more, and I found it worked better if the plastic has a layer of Dullcote on it, I guess because it gives the paint more "tooth" to adhere to. Anyway, I put a matte finish on the floats, then half-filled an aluminium baking pan with water topped with a layer of thinner and brown paint, and half-submerged the floats in that. The effect is subtle, but I think it worked better this time. I can't stress enough that I did this OUTSIDE, since spilling that slurry of paint and thinner in the missus's kitchen would be more than my life is worth!
Paul, I guess you're right about the c of g issue. But one way or another, that catapult's going to be holding a fair bit of weight!
Sir T, Thanks for the kind comment!
I experimented with the dirty waterline idea some more, and I found it worked better if the plastic has a layer of Dullcote on it, I guess because it gives the paint more "tooth" to adhere to. Anyway, I put a matte finish on the floats, then half-filled an aluminium baking pan with water topped with a layer of thinner and brown paint, and half-submerged the floats in that. The effect is subtle, but I think it worked better this time. I can't stress enough that I did this OUTSIDE, since spilling that slurry of paint and thinner in the missus's kitchen would be more than my life is worth!
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
-
- Modelling Gent and Scholar
- Posts: 1342
- Joined: May 1st, 2011, 1:11 am
- Location: Bristol, Va. USA
Re: Fred's Breakfast Bar
I love it! What a novel idea. Years ago when I built my Sunderland I was wanting to get a grimy waterline effect but couldn't pull it off to my satisfaction. Now I'm doing a Catalina for the Golden Oldies GB, and you've just made my day! I hope you don't mind if I steal your technique!
- iggie
- Modelling Gent and Scholar
- Posts: 23417
- Joined: July 31st, 2013, 11:04 am
- Location: North Somercotes, Lincolnshire
- Contact:
Re: Fred's Breakfast Bar
I suspect a larger foil tray will be in order!
Superb result Fred and I too will be shamelessly nicking it for similar projects
Best wishes
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
- Stuart
- Raider of the Lost Ark Royal
- Posts: 19415
- Joined: February 25th, 2013, 4:55 pm
- Location: North Wales
- Contact:
Re: Fred's Breakfast Bar
That is brilliant!
Stuart Templeton I may not be good but I'm slow...
My Blog: https://stuartsscalemodels.blogspot.com/
My Blog: https://stuartsscalemodels.blogspot.com/
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
Re: Fred's Breakfast Bar
Thanks, Dollar19! I think this would look good on a Sunderland or a Catalina, since the effect would show up well on their white undersides. Of course you're very welcome to use this! Please post photos!dollar19 wrote:I love it! What a novel idea. Years ago when I built my Sunderland I was wanting to get a grimy waterline effect but couldn't pull it off to my satisfaction. Now I'm doing a Catalina for the Golden Oldies GB, and you've just made my day! I hope you don't mind if I steal your technique!
By the way, I have to ask: is your on-line name based on this?
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
Re: Fred's Breakfast Bar
True! I saw a nice deep-dish lasagna in Costco which should do the trick!
Thanks for asking, but please feel free to "nick" away, and post some photos!
-
- Modelling Gent and Scholar
- Posts: 1342
- Joined: May 1st, 2011, 1:11 am
- Location: Bristol, Va. USA
Re: Fred's Breakfast Bar
Why yes it is! My all time favorite aircraft. My father flew them in the USMC as the R4Q variant. I have the Italeri in the stash as my tribute build. I had it since first release and still haven't mustered up the courage to attempt it.Canuck2016 wrote:Thanks, Dollar19! I think this would look good on a Sunderland or a Catalina, since the effect would show up well on their white undersides. Of course you're very welcome to use this! Please post photos!dollar19 wrote:I love it! What a novel idea. Years ago when I built my Sunderland I was wanting to get a grimy waterline effect but couldn't pull it off to my satisfaction. Now I'm doing a Catalina for the Golden Oldies GB, and you've just made my day! I hope you don't mind if I steal your technique!
By the way, I have to ask: is your on-line name based on this?
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
-
- Modelling Gent and Scholar
- Posts: 1342
- Joined: May 1st, 2011, 1:11 am
- Location: Bristol, Va. USA
Re: Fred's Breakfast Bar
Yep seen the original and the remake. Although I must say I am partial to the Jimmy Stewart version. I just couldn't buy into to full aileron roll before the crash in the remake.
- Canuck2016
- Active Participant
- Posts: 535
- Joined: March 6th, 2016, 4:03 pm
Re: Fred's Breakfast Bar
Yeah, I saw the original, but not the new one. Anyway, you gotta love that plane!