PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Millitary miscellany; Tanks, AFV, Trucks and other Soft-Skin vehicles etc.
Post Reply
LarryH57
The Bug Has Well And Truly Bitten
Posts: 236
Joined: December 4th, 2012, 11:58 pm

PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by LarryH57 »

To go with the British & Commonwealth CMP 15 cwt Truck by Plastic Soldier Company, I recently bought the 1/72 scale CMP Quad Field Artillery Tractor, as I fancied building something used by the Allies rather than Axis. Like the CMP Truck it is fairly simple in construction and goes together very quickly and lend itself to a bit of detailing, such as having wing mirrors, a hold on handle in front of the roof hatch and bridge plate. Some windows can also be stuck quite easily from the inside though purists may wish to fix them in the windows, especially in the rear compartment, as the doors are quite thick.

As with the CMP Truck the radiator is for a Chevrolet but the axles are Ford. In my case I removed these and added banjo type axles from the spares box after sawing out the kit ones between the stubs for the wheels. As it’s a Chevrolet it needs a radiator overflow tank stuck on the side of the bonnet on the left hand passenger side, which I have yet to make out of scrap.

Another option is to keep the axles, and not bother with a radiator overflow tank and instead shave off the detail on the radiator and make it flat (and more in scale) and add a small oval Ford badge

For a Ford radiator I was thinking of painting it a lighter shade of the base colour then spraying the vehicle colour through some fine mesh I have and so hopefully leave a pattern. I did consider cutting the mesh for the rad but it is too tough and also would not sit well on such a small model, plus I’d need to create an engine and engine bay to go behind it.

The bad bits apart from the wrong axles, is that the wheels are so massively over scale. Photos of CMPs show the extra-large gap between the top of the wheel and the wheel arches. This was to allow the axle to move quite a lot over rough ground. So with the kit wheels in place the Quad looks quite wrong but a rather easy solution is at hand by using the wheels from the CMP Truck which for a 15cwt are also massively oversize. When the CMP Truck wheels are used on the Quad they are still a bit large but look so much better. On the real Quad vehicle the tyres don’t come up higher than the bottom of the cab doors, and another problem is that the CMP wheels have a hole right through them, so the nice hub detail on the CMP Quad kit are lost. However I’m sure they can be made up from scrap.

All I need now is some wheels for the CMP Truck; hopefully someone will do some aftermarket ones for this kit and those to replace the really dreadful ones in IBG 1/72 scale CMP 15cwt kits!

As for colour schemes, although this vehicle was made from 1942 or 1943, it was too late for use in the Desert in WW2 and doesn’t feature that often in the Italian Campaign in 1943-1944, which suggests the vehicle may have been stock piled in the UK for D-Day. According to Mike Starmer’s camouflage research a mid-war CMP Quad may have been produced in SCC.2 Brown and have black or dark brown upper surfaces with micky mouse type camo on the sides, and yet most photos I have seen show these Quads in a single colour which for D-Day and afterwards in NW Europe would be the SC.15 Olive Drab which was the basic colour, which the Mike Starmer has stated didn’t need black upper surfaces and mickey mouse as in the previous scheme.

Top; the Quad with the kit wheels

Image

Quad with wheels from CMP 15cwt Truck
Image
LarryH57
The Bug Has Well And Truly Bitten
Posts: 236
Joined: December 4th, 2012, 11:58 pm

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by LarryH57 »

I've just found this link for replacement wheels

https://www.scalemates.com/kits/112745- ... -firestone;
User avatar
JohnRatzenberger
Why is he so confused ?
Posts: 15708
Joined: April 5th, 2011, 3:42 pm
Location: Living on a sandbar - Nags Head, NC.

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by JohnRatzenberger »

Agree on the wheels ...
John Ratzenberger :???:
It's my model and I'll do what I want with it.
ShaunW
NOT the sheep
Posts: 26118
Joined: November 26th, 2011, 6:11 pm
Location: Pontefract West Yorkshire

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by ShaunW »

Another excellent looking allied piece from you Larry. Being no expert on the Quad I'll go along with your wheel corrections :grin:
Doing - Tamiya 1/35th Universal Carrier.

Work is the curse of the modelling classes!
IPMS#12300
User avatar
iggie
Modelling Gent and Scholar
Posts: 23360
Joined: July 31st, 2013, 11:04 am
Location: North Somercotes, Lincolnshire
Contact:

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by iggie »

That looks to be a nice looking kit; I may have to invest in a couple!
Best wishes

Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
LarryH57
The Bug Has Well And Truly Bitten
Posts: 236
Joined: December 4th, 2012, 11:58 pm

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by LarryH57 »

And now the completed vehicle build more of less out of the box but with the PSC CMP 15 cwt Truck wheels and some Chevrolet banjo type axles. The kit has no decals so these came from the spares box.

The roof is a tight fit so went on without glue so the crew and perhaps windows will go in later.

As for the 25pdr the kit instructions are wrong in that the older type of carriage (that has a bowed profile) can go with a gun that has a muzzle brake and a shield that has indents in it above the wheels.

I used PSC paint to represent SC15 olive drab which according to Mike Starmer would not have had black mickey mouse camo on it. This vehicle is supposed to be new so is not too weathered.

Late type Chevrolet CMP Quads didn't have the radiator overflow on the nearside which was a relief!

BTW - the left over PSC Quad kit wheels look to be a reasonable match for a AEC Matador though they are a touch too thin, but still better than the old Airfix kit ones! The joy of the spares box!

Image

Image
User avatar
iggie
Modelling Gent and Scholar
Posts: 23360
Joined: July 31st, 2013, 11:04 am
Location: North Somercotes, Lincolnshire
Contact:

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by iggie »

A very nice little trio Larry and some very useful tips too
Best wishes

Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
ShaunW
NOT the sheep
Posts: 26118
Joined: November 26th, 2011, 6:11 pm
Location: Pontefract West Yorkshire

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by ShaunW »

That is nicely done Larry and a very informative thread.
Doing - Tamiya 1/35th Universal Carrier.

Work is the curse of the modelling classes!
IPMS#12300
User avatar
ntrocket88
Active Participant
Posts: 827
Joined: July 2nd, 2012, 11:49 pm
Location: New Jersey, USA

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by ntrocket88 »

Nicely done!
Neil

'With every model I learn a little more...and then the next one takes longer!'
LarryH57
The Bug Has Well And Truly Bitten
Posts: 236
Joined: December 4th, 2012, 11:58 pm

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by LarryH57 »

My kit was based on this vehicle seen about 2009 at Military Odyssey in Kent, but I'm thinking the green is too green on both my kit and the vehicle to be Olive Drab SCC.15. It can hardly be compared to US Olive Drab that it was supposed to be similar to; oh well you live and learn!

Image
ShaunW
NOT the sheep
Posts: 26118
Joined: November 26th, 2011, 6:11 pm
Location: Pontefract West Yorkshire

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by ShaunW »

That is a nicely restored Quad, Larry. IMHO some care has to be taken if using restored vehicles/aircraft as a reference point for a build, many such machines feature non-standard parts including bits from earlier/later models or more modern parts fitted for safety reasons (such as brake lights, turn signals, radio gear), incorrect colour schemes (museum aircraft in particular seem to suffer from the latter malady) and so on. That said, it's great to see the full-size close up and especially if it is an operating example rather than a static exhibit.
Doing - Tamiya 1/35th Universal Carrier.

Work is the curse of the modelling classes!
IPMS#12300
User avatar
Corricon
Modelling Gent and Scholar
Posts: 1035
Joined: September 3rd, 2017, 2:32 pm
Location: Huntingdon, Cambs

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by Corricon »

Nicely finished 8-)

Wee Friends do a set of Quad wheels for the Airfix Kit, which incidentally I used on the Matchbox kit. They may 'look' right on this kit plus that have the hub detail too!
Steve
Now a full time modeller!
LarryH57
The Bug Has Well And Truly Bitten
Posts: 236
Joined: December 4th, 2012, 11:58 pm

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by LarryH57 »

On my model I used Plastic Soldier Company British Armour Green paint which I was lead to believe was SCC.15 Olive Drab but it is far too green and not even a match for any British Armour in WW2, so who knows what they compared it to!
User avatar
PTB11
Modelling Gent and Scholar
Posts: 2462
Joined: April 30th, 2015, 12:50 pm
Location: Belfast

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by PTB11 »

Excellent work. Just crying out for a little diorama base.
Regards, Paddy.

On The Bench
Fujimi 1/72 A-7E Corsair II
LarryH57
The Bug Has Well And Truly Bitten
Posts: 236
Joined: December 4th, 2012, 11:58 pm

Re: PSC British 25pdr & CMP Quad Tractor in 1/72 scale

Post by LarryH57 »

I saw on another site that you need to saw off the second seat on the PSC 25 Pdr - only the left had seat is required opposite the sighting window in the shield. I should have looked at more references!
Post Reply

Return to “Tanks, AFV and other Military Models”