Thinning Acrylics.

Got something to say about the hobby of model making?
Post Reply
IronMan129
Modelling Gent and Scholar
Posts: 4385
Joined: November 23rd, 2012, 4:20 pm

Thinning Acrylics.

Post by IronMan129 »

Hey folks.
I read on another forum that distilled water works for thinning acrylics to use in an Airbrush.
I bought some of this:
http://www.halfords.com/workshop-tools/ ... p-water-1l;

I haven't tried it yet as I've not had time since getting home but would anyone give me some advice on if it works and how to use it i.e what ratio to use and things.

I ask here as I trust everyone here more than just some random forum.
User avatar
iggie
Modelling Gent and Scholar
Posts: 23360
Joined: July 31st, 2013, 11:04 am
Location: North Somercotes, Lincolnshire
Contact:

Re: Thinning Acrylics.

Post by iggie »

Plain water works too, although for all I know distilled may work even better.....
Ratio of paint to thinner is largely down to taste; the needle size in your airbrush will play a part, the paint manufacturer, temperature and even the colour can affect things. 50/50 is for me a good starting point, then adjust to suit circumstances.......
Best wishes

Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
User avatar
PTB11
Modelling Gent and Scholar
Posts: 2462
Joined: April 30th, 2015, 12:50 pm
Location: Belfast

Re: Thinning Acrylics.

Post by PTB11 »

I agree with Iggie, I used tap water for years at a 50:50 ratio and apply in thin coats.
Regards, Paddy.

On The Bench
Fujimi 1/72 A-7E Corsair II
User avatar
Ratch
Modelling Gent and Scholar
Posts: 9889
Joined: May 1st, 2011, 9:16 am
Location: Northampton

Re: Thinning Acrylics.

Post by Ratch »

I used Vallejo Model Air - no thinning required :ha:
All models are equal. Some models are more equal than others.
Airfix Tribute Forum
User avatar
Dazzled
Modelling Gent and Scholar
Posts: 9592
Joined: October 1st, 2011, 11:08 pm
Location: Mid Glamorgan, South Wales
Contact:

Re: Thinning Acrylics.

Post by Dazzled »

Be very wary of what type of paint you're using. Some acrylics are alcohol-based and some are water-based. Tamiya is alcohol-based paint and doesn't like being thinned with water very much Don't ask me how I found out!!). Water based paints include Humbrol, Revell Aqua (bit of a give away ;-) ), Vallejo and Mr Hobby Aqueous (another give away). It's important to check first or you end up with a mess or a clogged airbrush. Personally, I always try to use the manufacturers recommended thinners but do, from time to time, use just water or plain isopropanol.
COLD WAR S.I.G. LEADER

Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
User avatar
JohnRatzenberger
Why is he so confused ?
Posts: 15708
Joined: April 5th, 2011, 3:42 pm
Location: Living on a sandbar - Nags Head, NC.

Re: Thinning Acrylics.

Post by JohnRatzenberger »

iggie wrote:.....
Ratio of paint to thinner is largely down to taste.......
I think there are warnings on the bottle about that :)
John Ratzenberger :???:
It's my model and I'll do what I want with it.
User avatar
Eric Mc
Modelling Gent and Scholar
Posts: 4795
Joined: May 3rd, 2011, 8:27 am
Location: Farnborough, Hants

Re: Thinning Acrylics.

Post by Eric Mc »

I have found that Xtracrylic Thinner seems to work with virtually all the acrylic paints I generally use - Xtracrylic, Tamiya, Revell etc.
User avatar
Crashpilot
...happily fooling around with styrene
Posts: 1655
Joined: August 27th, 2015, 3:15 pm
Location: Celle, Land of Wurst

Re: Thinning Acrylics.

Post by Crashpilot »

Eric Mc wrote:I have found that Xtracrylic Thinner seems to work with virtually all the acrylic paints I generally use - Xtracrylic, Tamiya, Revell etc.
Did you try it with Humbrol Acrylics, too? I´m curious to know, cause some buddies and I are about to place an order at
hen antz...
Waiting for the day, when wars for territory will be something to be read about in history books only.

Playing Tetris taught me: If I clean up too much, my kits disappear.....8-(

Markus, alias Crashpilot, or Crash, or CP, as you wish
Muttzley
The Bug Has Well And Truly Bitten
Posts: 224
Joined: April 13th, 2015, 4:57 pm

Re: Thinning Acrylics.

Post by Muttzley »

Anything work well with Citadel paints?
User avatar
MarkyM607
Modelling Gent and Scholar
Posts: 9153
Joined: January 5th, 2013, 1:16 pm
Location: Cambs

Re: Thinning Acrylics.

Post by MarkyM607 »

Muttzley wrote:Anything work well with Citadel paints?
I always used water. :grin:
Hoping to return to modelling sometime this year!! :lol:
Owner of Marky's Model Emporium since 2013!.
User avatar
Eric Mc
Modelling Gent and Scholar
Posts: 4795
Joined: May 3rd, 2011, 8:27 am
Location: Farnborough, Hants

Re: Thinning Acrylics.

Post by Eric Mc »

I don't use Humbrol acrylics so can't say much about them.
User avatar
Crashpilot
...happily fooling around with styrene
Posts: 1655
Joined: August 27th, 2015, 3:15 pm
Location: Celle, Land of Wurst

Re: Thinning Acrylics.

Post by Crashpilot »

I guess I´ll try distilled water, next time.
Quality of tab water varies a lot: isn´t the so-called "hardness" of the water important, when it comes to mixing acrylics?

Where I live, there´s some lime in the tab water, when a puddle of tab water dries up, you can see a white residue after.
In some regions in Germany, there´s so much lime in the water, that the thin residue looks more like a crust!
(Since another hobby of mine is aquaria, where the hardness of the water plays an important role, this thing came to my mind.)
Waiting for the day, when wars for territory will be something to be read about in history books only.

Playing Tetris taught me: If I clean up too much, my kits disappear.....8-(

Markus, alias Crashpilot, or Crash, or CP, as you wish
User avatar
Bill_B
The Bug Has Well And Truly Bitten
Posts: 244
Joined: December 13th, 2017, 3:22 pm

Re: Thinning Acrylics.

Post by Bill_B »

Hi Crashpilot, I’ve visited Celle every year for the last 31 years (and got married to a pretty local girl in the beautiful Rathaus), but the water in that region is much softer than where I live in Derbyshire. Here it is really hard so you’re not too badly off. ;-)
Anyway, personally I always use Tamiya X-20A to thin their paints at a ratio of 75% paint to 25% thinner, and I thin Mr. color GX lacquer 50/50 with Mr. Color Thinner for very pleasing results.
User avatar
Crashpilot
...happily fooling around with styrene
Posts: 1655
Joined: August 27th, 2015, 3:15 pm
Location: Celle, Land of Wurst

Re: Thinning Acrylics.

Post by Crashpilot »

Bill_B wrote:Hi Crashpilot, I’ve visited Celle every year for the last 31 years (and got married to a pretty local girl in the beautiful Rathaus), but the water in that region is much softer than where I live in Derbyshire. Here it is really hard so you’re not too badly off. ;-)
Anyway, personally I always use Tamiya X-20A to thin their paints at a ratio of 75% paint to 25% thinner, and I thin Mr. color GX lacquer 50/50 with Mr. Color Thinner for very pleasing results.
Oh, wow, sometimes the world seems to be a small place ;-) !
You´re one RA guy, aren´t you ;-)
Waiting for the day, when wars for territory will be something to be read about in history books only.

Playing Tetris taught me: If I clean up too much, my kits disappear.....8-(

Markus, alias Crashpilot, or Crash, or CP, as you wish
Post Reply

Return to “Small Talk”