How to make a water effect base

Ideas for displaying your models.
Post Reply
User avatar
splash
Senior Service Rotorhead
Posts: 13828
Joined: May 1st, 2011, 11:02 am
Location: Somerset England

How to make a water effect base

Post by splash »

Materials needed

Polystyrene base
Green & Blue Acrylic paints (Cheap art liquid acrylic paints type are fine)
PVA glue (woodwork/art type glue that sets clear when dry)
1/4 -1/2 brush

If you are mounting a sea plane or ship cut out an area for the hull to sit in first, the sample shown was an experiment to see if the process would work hence no cut out.

Start with the polystyrene base, I used a piece of packing sheet that came with a stationery order, paint it with the acrylic paints you don’t have to be artistic, just slap the paint down using blue and green in a random pattern merge the colours were they join to stop any harsh lines.

When the paint is dry poor PVA glue over the whole surface and brush the glue into small waves. When the glue has dried and gone clear, repeat the process again and again until you have the desired effect, the sample shown had four coats of PVA.

Thats all ther is to it plane and simple with very little outlay in time or money.

Image

Image

Image

Image

Image

Image

Image

Image
User avatar
PaulBradley
Staring out the window
Posts: 21115
Joined: April 6th, 2011, 3:08 pm
Location: Flagstaff, AZ

Re: How to make a water effect base

Post by PaulBradley »

Simple and effective - thanks for sharing.
Paul

За демократію і незалежний Україну

"For Democracy and a Free Ukraine"
User avatar
JamesPerrin
Looks like his avatar
Posts: 13617
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: How to make a water effect base

Post by JamesPerrin »

x10 what Paul said.


I need to do a seascape soon however the waves need to be quite dramatic. I'll be using polyfilla to sculpt the waves and then paint them up in similar colours as you've done yours. I've done this a couple of times in the past when I did some 'dragon on a rock' sculptures, with waves crashing against the rocks so I've comfortable about getting the results I want.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:1) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
JohnRatzenberger
Why is he so confused ?
Posts: 15708
Joined: April 5th, 2011, 3:42 pm
Location: Living on a sandbar - Nags Head, NC.

Re: How to make a water effect base

Post by JohnRatzenberger »

Thank you for that useful tutorial. I have tried a similar method with different materials and need to try again with yours.
John Ratzenberger :???:
It's my model and I'll do what I want with it.
User avatar
Dirkpitt289
NUMA's Auto Mechanic
Posts: 8710
Joined: May 2nd, 2011, 1:55 am
Location: New jersey USA
Contact:

Re: How to make a water effect base

Post by Dirkpitt289 »

jRatz wrote:Thank you for that useful tutorial. I have tried a similar method with different materials and need to try again with yours.
I think it would be useful if you were to post your method also. Alternatives are always good.
.... Dirk

Beware of the DOG's of WAR

My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
User avatar
AndrewR
In the basement lab
Posts: 23913
Joined: April 5th, 2011, 4:13 pm
Location: Ottawa, Ontario, The Great White North
Contact:

Re: How to make a water effect base

Post by AndrewR »

A great tutorial Splash, thanks a lot.

Cheers

Andrew
Up in the Great White North
User avatar
MrDyzio
The Bug Has Well And Truly Bitten
Posts: 353
Joined: May 2nd, 2011, 12:24 am
Location: DC Metro Area
Contact:

Re: How to make a water effect base

Post by MrDyzio »

Great idea Splash!!! Thanks for sharing!!!
My modeling Blog Dyzio Scale Models
User avatar
Chuck E
Established 1949
Posts: 2414
Joined: May 3rd, 2011, 8:05 pm
Location: Darlington. Home of the Railways

Re: How to make a water effect base

Post by Chuck E »

That is a very good method Splash. I'm going to try it soon. Thanks.

Chuck
So many models, so little time.
User avatar
splash
Senior Service Rotorhead
Posts: 13828
Joined: May 1st, 2011, 11:02 am
Location: Somerset England

Re: How to make a water effect base

Post by splash »

Just a quick update.

To finish of the base, I found a simple frame from a local 99p shop, removed the glass and stuck the base in from behind.

Image

Image
My work bench is starting to look like Portsmouth Naval Dockyard.
User avatar
[Matt]Curahee
Series 3 and Beyond
Posts: 10
Joined: November 8th, 2011, 10:55 am
Location: UK

Re: How to make a water effect base

Post by [Matt]Curahee »

This effect is brilliant! i might try it for a little lake Im thinking of including in something Im working on :)
Thanks for sharing.
"Vi veri universum vivus vici"
User avatar
Dazzled
Modelling Gent and Scholar
Posts: 9592
Joined: October 1st, 2011, 11:08 pm
Location: Mid Glamorgan, South Wales
Contact:

Re: How to make a water effect base

Post by Dazzled »

Great method Splash. I'm definately going to give that a try.

Thanks for sharing :)
COLD WAR S.I.G. LEADER

Wherever there's danger, wherever there's trouble, wherever there's important work to be done....I'll be somewhere else building a model!
User avatar
Jaime
Modelling Gent and Scholar
Posts: 1218
Joined: January 26th, 2013, 10:36 pm

Re: How to make a water effect base

Post by Jaime »

Just what I was looking for! That's a superb effect and one I will do a practice job on before attempting my HMS Winchelsea conversion. A couple of questions though:

1. When you repeat the process, do you mean just add another layer of PVA or paint the underlying coat of dry PVA first and then add another layer of PVA?
2. Presumably you brush along the length of the waves in order to create them?

Jaime
2021
Complete: Airfix 1/400 Mary Rose, 1/72: Airfix Swordfish Mk1 Floatplane, Airfix R.A.F. R.E.8, Airfix Hannover CL.111a, Mitsubishi A6M2b Zero, Curtiss P40B Warhawk
User avatar
bobblelink
Active Participant
Posts: 627
Joined: May 6th, 2011, 2:20 pm

Re: How to make a water effect base

Post by bobblelink »

That's a great effect, thanks for sharing; I have achieved some interesting results using bathroom sealant which I shall post as soon as I can get my useless camera to work.
currently on the go: Revell Blenheim I, Italeri Me210, Revell HMS victory, Revell 1/144 p-47
completions in 2012:8, completions in 2013: 13, Completions in 2014:10, Completions in 2015: 9, Completions in 2016: 8, Completions in 2017: 9, Completions in 2018: 12, completions in 2019:7, completions in 2020: 17
User avatar
nashorn
The Bug Has Well And Truly Bitten
Posts: 268
Joined: April 3rd, 2013, 4:08 pm
Location: warwickshire

Re: How to make a water effect base

Post by nashorn »

Really good idea splash, i will be trying that method shortly.
thanks for the lesson.

rich.
Rich.
User avatar
splash
Senior Service Rotorhead
Posts: 13828
Joined: May 1st, 2011, 11:02 am
Location: Somerset England

Re: How to make a water effect base

Post by splash »

Jaime wrote:Just what I was looking for! That's a superb effect and one I will do a practice job on before attempting my HMS Winchelsea conversion. A couple of questions though:

1. When you repeat the process, do you mean just add another layer of PVA or paint the underlying coat of dry PVA first and then add another layer of PVA?
2. Presumably you brush along the length of the waves in order to create them?

Jaime
Hi Jaime

Sorry for the delay in responding to your question.

I add the second or third coat of PVA straight on top of the previous layer of PVA and yes I brush it along the length of the waves to give them depth.

Regards Splash
My work bench is starting to look like Portsmouth Naval Dockyard.
Post Reply

Return to “Display and Diorama”