CAG's Revell \ Monogram Black Widow ***FINISHED***

Runs January 1st 2012 to January 31st
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow

Post by Raptor »

Strangely enough - I dont think I have a single other twin boomer in my stash....... may have to go and look tonight.
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow

Post by Raptor »

A small update - wherein I prove the value of not assuming anything, no matter how strange....

I have been working, but if you recall right at the start, I did say I was in the middle of moving house..... damn don't you hate the way life gets in the way of modelling??

She's now all decaled and stenciled...... BUT

While waiting for the decals to set, I decided to put the fuel tanks together........ what a bad fit they were. Check out the huge difference around the edge of this...... :twisted:
Image
So I spent ages cleaning up two of the fuel tanks - making the side match up.... after spending the best part of an hour cleaning up a single pair, I took a break.... and flicking through some photo's, discovered that the fuel tanks were actually correct!!?? :-| WTF??!! :-| :-| I have photos that actually show that difference between the two halves. :shock: :shock: Buggered if I was going to undo what I'd done, so two of the fuel tanks are going to be odd.....

Also spent ages masking all the transparencies. I've taken to lining the frames with a fine point Gundam paint marker, so that when the tape is on, the frames are far more obvious when trimming the tape away....
Image
Image

So now everything is ready for the final leg - undercarriage, props, bay doors, and antennas will go on tomorrow - once the cement is dry, the transparencies will be added, then a hit of dullcoat..... and done!
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
User avatar
jssel
Still crazy after all these years
Posts: 12007
Joined: April 5th, 2011, 3:42 pm

Re: CAG's Revell \ Monogram Black Widow

Post by jssel »

Wonderful work on a real classic. I bet Monogram/Revell has sold a ton of these and I have yet to see one built up.
Besting 60 years of mediocre building of average kits in the stand off scale
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow

Post by Raptor »

thanks Jeff - I am really enjoying this build. I know I keep saying it - but who cares if it is an old kit with a few "issues".... it's fun!!! I've seen a few built up - but given the numbers that must have been sold, you are right - finished ones do seem to be rare.
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
User avatar
Martin R
Modelling Gent and Scholar
Posts: 4695
Joined: May 1st, 2011, 7:53 am

Re: CAG's Revell \ Monogram Black Widow

Post by Martin R »

Well, you're doing some great work on it.

Re not seeing many made up, I'm guessing it's not a small beast in 48th. Perhaps that puts some people off. Also, I'm betting that others are put off by the raised panel lines.

Personally your build - and the Twin Mustang - are making me want to hunt out the few Monogram kits in my stash and make 'em as is. The 1/48th Typhoon 1b comes to mind . . .

regards,

Martin
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow

Post by Raptor »

The (almost) final installment!!

****************************
Image
****************************
Done. I'll post some better pics tomorrow - these shots were taken at the workbench, where the light for photo's isnt that good for big subjects......
The only real weathering I've done is some exhaust staining. I tried some of the Tamiya Weathering Master stuff - have to say - it's excellent. So easy to apply, and looks good. Nice and subtle on the black.
Image
Image
Decals settled nicely under a coat of Testors Dullcote
Image

Red wing striping was fun - you have to cut the lengths yourself.... Note the missing window in the tail section. Second last piece to be fitted, and guess what? Fed the carpet monster :sad:
Image

Overall, an enjoyable build, to say the least. And those windows everyone says are such an issue on this kit? Dropped straight into place!!

And I did find time for one other little thing...... it's to go on the base along with a couple of palm trees I have ordered from Evilbay...... (It's an IJN Komatsu Dozer)
Image
Image

So - some better pics tomorrow folks - it's been a real pleasure doing this one!
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow

Post by Raptor »

Martin R wrote:Well, you're doing some great work on it.

Re not seeing many made up, I'm guessing it's not a small beast in 48th. Perhaps that puts some people off. Also, I'm betting that others are put off by the raised panel lines.

Personally your build - and the Twin Mustang - are making me want to hunt out the few Monogram kits in my stash and make 'em as is. The 1/48th Typhoon 1b comes to mind . . .

regards,

Martin
Would love to lay my hands on the Typhoon..... I've go the Eduard Tempest, they'd make a beautiful pair.

Cheers,
Shaun.
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
User avatar
smethwick
Onto the Clever Stuff, Now.
Posts: 187
Joined: May 2nd, 2011, 9:03 pm
Location: Warley

Re: CAG's Revell \ Monogram Black Widow

Post by smethwick »

that looks really great...great work
An ounce of loyalty is worth a pound of cleverness.
Elbert Hubbard
MerlinJones

Re: CAG's Revell \ Monogram Black Widow

Post by MerlinJones »

That's definitely an aircraft that looks like it was designed to do hard business...and your model does it proud.
Well done.

Regards,
Bruce
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow

Post by Raptor »

Thanks Bruce...... that's one of the things I like about it - it looks like something that was designed for just one purpose - to ruin someones day. Never did like "pretty " aircraft.....

S.
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
User avatar
JamesPerrin
Looks like his avatar
Posts: 13695
Joined: April 5th, 2011, 8:09 pm
Location: W. Yorkshire
Contact:

Re: CAG's Revell \ Monogram Black Widow

Post by JamesPerrin »

WOW that has come on leaps and bounds! It looks tremendous and great fun to build. These great old Monogram kits do really need to be celebrated.
Classic British Kits SIG Leader Better to fettle than to fill
(2024 A:B 5:2) (2023 13:8:7) (2022 21:11) (2021 15:8) (2020 8:4:4)
User avatar
Molly-new
Modelling Gent and Scholar
Posts: 2355
Joined: May 4th, 2011, 8:42 pm
Location: Stoke-on-Trent, England

Re: CAG's Revell \ Monogram Black Widow

Post by Molly-new »

Awesome build. i am looking forward to seeing the full diorama.
Airfix WWII Aircraft Of The Aces.
Completed - 10
Building -
Pending -4
User avatar
Viking
The Bug Has Well And Truly Bitten
Posts: 216
Joined: May 1st, 2011, 8:53 am
Location: land of glen's, of ben's, of hero's

Re: CAG's Revell \ Monogram Black Widow

Post by Viking »

that looks really nice; its a plane i always wanted to build but never got around to it. i may just have to dig it out of the stash.
Completed: not counting. Bought: trying not to let Mrs Viking count
User avatar
splash
Senior Service Rotorhead
Posts: 13828
Joined: May 1st, 2011, 11:02 am
Location: Somerset England

Re: CAG's Revell \ Monogram Black Widow

Post by splash »

Well done it looks brilliant, all the little changes you did make all the difference.

Regards
Splash
My work bench is starting to look like Portsmouth Naval Dockyard.
User avatar
Raptor
Getting well comfy!
Posts: 93
Joined: November 16th, 2011, 5:32 am

Re: CAG's Revell \ Monogram Black Widow ***FINISHED***

Post by Raptor »

Thanks to everybody for their comments and encouragement on this - it's the first time I have ever been involved in a GB, and it wont be the last. It's been a real pleasure sharing the build!!
Shaun T
aka:
CAG-00.

Build for your pleasure - not theirs.

1:72 Intruder
54mm Marvel "Thor"
Revell 1:32 Tornado 2009 Tigermeet
Revell 1:72 F16 Tigermeet


A: 1 B: 5
Locked

Return to “Boom! Boom! Basil Brush's Twin-boom Aircraft GB”