aeroplanegrippers "The Deacon"
- Loftleidir
- Series 3 and Beyond
- Posts: 44
- Joined: April 6th, 2013, 8:29 am
- Location: Iceland
Re: aeroplanegrippers "The Deacon"
good progress !,
I have never build a P51B, intresting to see some builds before I tackle one ;)
I have never build a P51B, intresting to see some builds before I tackle one ;)
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: aeroplanegrippers "The Deacon"
Good day everyone, especially those in the UK who are about to have a Bank Holiday tomorrow!
I have spent a fair deal of time doing some priming with the faithful Halfords Rattle can on the P-51:
As this P-51 was marked up with Invasion Stripes I masked up five blocks of 30mm, masked off and sprayed some Rattle can Flat white. I also began marking off the Red Squadron ID stripes on the Vertical stabiliser and nose.
After I finished I realised how busy this is going to look, I think that I have sprayed the left end of the white border too close to the canopy, but the actual reference photo I have seems to match. The next step will be to mask off the white, spray the red, and do the underside. Job for tomorrow me thinks.
Back to the Lanc and the engine assembly! Pics tomorrow. Thanks for looking.
I have spent a fair deal of time doing some priming with the faithful Halfords Rattle can on the P-51:
As this P-51 was marked up with Invasion Stripes I masked up five blocks of 30mm, masked off and sprayed some Rattle can Flat white. I also began marking off the Red Squadron ID stripes on the Vertical stabiliser and nose.
After I finished I realised how busy this is going to look, I think that I have sprayed the left end of the white border too close to the canopy, but the actual reference photo I have seems to match. The next step will be to mask off the white, spray the red, and do the underside. Job for tomorrow me thinks.
Back to the Lanc and the engine assembly! Pics tomorrow. Thanks for looking.
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
- Dirkpitt289
- NUMA's Auto Mechanic
- Posts: 8724
- Joined: May 2nd, 2011, 1:55 am
- Location: New jersey USA
- Contact:
Re: aeroplanegrippers "The Deacon"
Rolling rolling rolling... along.... Looking good!
.... Dirk
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
-
- Onto the Clever Stuff, Now.
- Posts: 131
- Joined: May 1st, 2011, 8:15 pm
Re: aeroplanegrippers "The Deacon"
Looking really good Mark - well done.
2016
A=0.
B=0.
C=0.
2015:A=23,B=22,C=2.
2014:A=10,B=26,C=1.
2013:A=12,B=16,C=0.
2012:A=11,B=14,C=1.
2011:A=18,B=9,C=6.
2010:A=26,B=19,C=11.
A=0.
B=0.
C=0.
2015:A=23,B=22,C=2.
2014:A=10,B=26,C=1.
2013:A=12,B=16,C=0.
2012:A=11,B=14,C=1.
2011:A=18,B=9,C=6.
2010:A=26,B=19,C=11.
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: aeroplanegrippers "The Deacon"
Thanks for all your kind comments gents.
Today I have carried on with the prep for the paint scheme. I have masked over the white Invasion borders, and completed the red ID markings on the nose, front cowling ring and Tail.
I then airbrushed the underside Humbrol Neutral Grey, which went on quite nice;
The last part of the day, prior to walking down to the pub, was to assemble the quickboost prop blades to the spinner, and then oops a blade
snapped at the fixing point. Instead of swearing, counting to ten, I drilled in a piece of old redundant drill bit:
I then drilled into the broken blade and attached with CA, hopefully itll keep and behave.
Well that will be all until I get back at the end of the week. Next step will be to get on the Xtracolour OD and put on the Black Invasion stripes. Thanks for looking and letting me share.
Today I have carried on with the prep for the paint scheme. I have masked over the white Invasion borders, and completed the red ID markings on the nose, front cowling ring and Tail.
I then airbrushed the underside Humbrol Neutral Grey, which went on quite nice;
The last part of the day, prior to walking down to the pub, was to assemble the quickboost prop blades to the spinner, and then oops a blade
snapped at the fixing point. Instead of swearing, counting to ten, I drilled in a piece of old redundant drill bit:
I then drilled into the broken blade and attached with CA, hopefully itll keep and behave.
Well that will be all until I get back at the end of the week. Next step will be to get on the Xtracolour OD and put on the Black Invasion stripes. Thanks for looking and letting me share.
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
- Dirkpitt289
- NUMA's Auto Mechanic
- Posts: 8724
- Joined: May 2nd, 2011, 1:55 am
- Location: New jersey USA
- Contact:
Re: aeroplanegrippers "The Deacon"
Damn shame about the prop. Is it me or does it looks shorter than the rest? Just kidding. Great save
.... Dirk
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: aeroplanegrippers "The Deacon"
Bit more progress on "The Deacon" last night, I have sprayed on the Xtracolor Olive Drab.
I let this dry overnight, and this afternoon took off the masking tape to check the results. Im very happy with the coverage and am thinking it looks more business like now.
Side view
My next job this afternoon will be to mark up for the black invasion stripes and try out placing a stencil for the stars and bars on the fuselage.I will be using the Xtracolor tyre black for the stripes as it wont be too stark. As this a/c was lost in action on D Day night I wont be doing any weathering on her as the stripes would I expect be too fresh.
I let this dry overnight, and this afternoon took off the masking tape to check the results. Im very happy with the coverage and am thinking it looks more business like now.
Side view
My next job this afternoon will be to mark up for the black invasion stripes and try out placing a stencil for the stars and bars on the fuselage.I will be using the Xtracolor tyre black for the stripes as it wont be too stark. As this a/c was lost in action on D Day night I wont be doing any weathering on her as the stripes would I expect be too fresh.
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
- Dirkpitt289
- NUMA's Auto Mechanic
- Posts: 8724
- Joined: May 2nd, 2011, 1:55 am
- Location: New jersey USA
- Contact:
Re: aeroplanegrippers "The Deacon"
Great work so far. Looking real good
.... Dirk
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
Beware of the DOG's of WAR
My Youtube Channel
https://www.youtube.com/user/ModelingGu ... rid&view=0
- Molly-new
- Modelling Gent and Scholar
- Posts: 2355
- Joined: May 4th, 2011, 8:42 pm
- Location: Stoke-on-Trent, England
Re: aeroplanegrippers "The Deacon"
Looking real good, and a great paint job.
Airfix WWII Aircraft Of The Aces.
Completed - 10
Building -
Pending -4
Completed - 10
Building -
Pending -4
Re: aeroplanegrippers "The Deacon"
Keep ridin' herd, Mark. Looks good.
Besting 60 years of mediocre building of average kits in the stand off scale
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: aeroplanegrippers "The Deacon"
Hello all,
Just a quick update on the progress of the paint job, I have had a set of the Markur paint pasks for stars and bars for quite a while now and affixed them to the fuselage sides to protect the white and black stripes, for when I put the decals on.
They are a bit fiddly and I have noticed that I have left a bit of a gap there on the star, but I will press on.
This afternoon I will spray the black stripes and hopefully post some pics later as a progress report.
Just a quick update on the progress of the paint job, I have had a set of the Markur paint pasks for stars and bars for quite a while now and affixed them to the fuselage sides to protect the white and black stripes, for when I put the decals on.
They are a bit fiddly and I have noticed that I have left a bit of a gap there on the star, but I will press on.
This afternoon I will spray the black stripes and hopefully post some pics later as a progress report.
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
- aeroplanegripper
- Active Participant
- Posts: 563
- Joined: October 20th, 2012, 5:05 pm
- Location: Malvern, Worcestershire.
Re: aeroplanegrippers "The Deacon"
Despite being a really slow builder, I have suprised myself today and got ahead and sprayed on the black invasion stripes onto the kit. I have used the Xtracolour Tyre Black, as I think I mentioned in an earlier post.
I have noticed a bit of leakage but nothing too disastrous, as thought, though because I didnt completely mask up the stars and bars stencil, some of the black has got through.
I am really enjoying this build, though as I Iam building the Revell Lanc in tandem for the 617 GB, I think I am rushing this one a bit and am trying to put as much effort in the Lanc as I can. Tonight I will spray on the Future gloss coat and let it dry overnight for the decals in the AM. I will be using the old Microscale decal sheet Serial 72-365, I have had it for an absolute age and hope they behave!
Thanks for looking and letting me share
I have noticed a bit of leakage but nothing too disastrous, as thought, though because I didnt completely mask up the stars and bars stencil, some of the black has got through.
I am really enjoying this build, though as I Iam building the Revell Lanc in tandem for the 617 GB, I think I am rushing this one a bit and am trying to put as much effort in the Lanc as I can. Tonight I will spray on the Future gloss coat and let it dry overnight for the decals in the AM. I will be using the old Microscale decal sheet Serial 72-365, I have had it for an absolute age and hope they behave!
Thanks for looking and letting me share
Best Regards
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Mark
"bis vivit qui bene vivit"
IPMS UK No 9960
On the go (ish), and under the bench or about to be:
Academy P-51C Mustang -1/72nd
Academy Grumman Hellcat II - 1/72nd
Hasegawa Brewster Buffalo I - 1/72nd
Re: aeroplanegrippers "The Deacon"
nice work on the stripes