Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

First impressions do count. Let us know what you think of your kits - new and old.
Post Reply
User avatar
iggie
Modelling Gent and Scholar
Posts: 23438
Joined: July 31st, 2013, 11:04 am
Location: North Somercotes, Lincolnshire
Contact:

Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

Post by iggie »

This kit has been released as a bundle by Das-Werk, and comprises the Trumpeter styrene kit of the RF8 Aerosan (itself a nice kit), and PE by VoyagerModel and plywood decals from Uschi van der Rosten. The idea being that the plywood construction of these novel vehicles can be recreated to whatever degree the modeller desires, from a factory fresh, unpainted unit to a time seved and batl scarred one with replacement panels.

The RF8 (courtesy of Wikipedia)
The RF-8, or GAZ-98, was an aerosan used by the Soviet Union during the Second World War and developed by Gorki Narkorechflota. The GAZ-98K was a version with a more powerful GAZ Shvetsov M-11 five-cylinder air-cooled 110-hp radial aviation engine in place of the standard automotive engine.[1]

The Aerosan, which is Russian for "aero-sleigh" or propeller driven sleigh, was military vehicle that was used operationally in snowbound winter regions of Northern Europe by several nations during the first half of the 20th century; however it was Russia that made the most use of these specialised winter combat vehicles. The vehicles operated very successfully in these snowbound isolated areas with their poor road infrastructures, where tracked and wheeled vehicles were restricted by heavy snowfalls. These aerosans were organised into both combat aerosled battalions (BASB) and transport aerosled battalions (TASB).

The RF-8 was one such vehicle. its design name was River Fleet 8 and was built by The Gorkiy Automobile Factory under the name Gaz-98, it soon acquired the commonly used designation RF-8-Gaz-98. This diminutive vehicle entered service in January 1942 and its thought approximately 2000 were built throughout the war period.

It was constructed of aviation plywood and if like other aerosans was screwed and glued to a wooden frame. The vehicle sat on four wooden skis mounted on sprung suspension, and was powered by the same engine used in the Gaz-MM 4x2 truck, driving a two bladed 2.35m diameter rear mounted metal propeller Compared to other aerosans of the time, the engine was comparatively low down giving it a low centre of gravity and therefore it was quite stable at speed, and the metal propeller fared better in wooded areas where it was less prone to damage from trees and light undergrowth. The crew compartment was typical of aviation design; a two-man crew sat in tandem; the driver at the rear and the commander/gunner at the front, who was armed with a ring mounted 7.62mm DT machine gun, allowing 300° of traverse.

The RF-8-Gaz-98 was fast, stable effective; and was perfect for reconnaissance, communication, patrolling and raiding roles especially in support of ski troops; often operating behind enemy lines. In the winter of 1942/43 a large number were fitted with aircraft radial engines and designated (RF-8) Gaz-98K. The RF-8 operated into the 1950s with the Soviet border guards.

The Kit & box contents
The kit as said is based upon the trumpeter styrene tooling, with 7 sprues of light grey plastic featuring very nicely detailed and flash free parts. There are two crew figures included. All the parts are free of flash, and the sprue containing the finer parts is wrapped with a foam sleeve to help avoid damage.

the PE fret looks really nice, the radiator grill especially so! it is so fine that you can read through it! The is a small decal sheet, and a single clear part for the front screen and headlamp lens.

The plywood decal sheets are the usual Uschi fine work, with three differing shades and textures represented for some nice variety when used; based on previous experience they will look fantastic over a light wood colour base, and topped with clear orange or yellow to seal them in.

Overall, an impressive little kit with some nice extras included


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Best wishes

Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
User avatar
PropWash
Active Participant
Posts: 562
Joined: October 14th, 2017, 5:39 am
Location: Tennessee, USA

Re: Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

Post by PropWash »

Great review! I look forward to seeing you build it.
User avatar
JohnRatzenberger
Why is he so confused ?
Posts: 15734
Joined: April 5th, 2011, 3:42 pm
Location: Living on a sandbar - Nags Head, NC.

Re: Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

Post by JohnRatzenberger »

Good review, thanks for sharing. I had been aware of the vehicle & kit, but never paid it any attention.
On a closer look, the uniqueness of the vehicle, and the extras packaged with it make it tempting.

I do note that it comes with figures, and that is a very nice touch, not having to sculpt something else to fit. However then the image of a WWI FE or Vickers with the gunner standing in the seat, firing backwards over the top wing, got me to thinking about what might it look like if one of those were caught in the open by a fighter .... Hmmm, interesting vignette :) Maybe the SciFi/SteamPunk GB ?
John Ratzenberger :???:
It's my model and I'll do what I want with it.
User avatar
iggie
Modelling Gent and Scholar
Posts: 23438
Joined: July 31st, 2013, 11:04 am
Location: North Somercotes, Lincolnshire
Contact:

Re: Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

Post by iggie »

Now there's a thought John; the Aerosan would lend itself very nicely to being 'steampunked' :-D
So much so that I've just ordered a basic Trumpeter edition of it for a stupidly cheap price ready for the GB :-D
Best wishes

Jim
If you can walk away from a landing, it's a good landing. If you use the airplane the next day, it's an outstanding landing
"Never put off till tomorrow, what you can do the day after tomorrow"
ShaunW
NOT the sheep
Posts: 26188
Joined: November 26th, 2011, 6:11 pm
Location: Pontefract West Yorkshire

Re: Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

Post by ShaunW »

Now that is what I call a nicely comprehensive kit, Jim, decent basic plastic parts, good quality upgrades from the likes of Voyager and Uschi v. d. R. and some half decent figures. A great review and potted history of this interesting machine, thanks for taking the time.
Doing - Tamiya 1/35th Universal Carrier.

Work is the curse of the modelling classes!
IPMS#12300
User avatar
splash
Senior Service Rotorhead
Posts: 13828
Joined: May 1st, 2011, 11:02 am
Location: Somerset England

Re: Das-Werk Soviet AEROSAN RF8/GAS-98 1/35th Scale

Post by splash »

Great review cheers for sharing.

Regards Splash
My work bench is starting to look like Portsmouth Naval Dockyard.
Post Reply

Return to “In-Box reviews”